April 2012 - VoiceOps - lists.voiceops.org

TCPDump on an Adtran TA908E
by zak＠simplesignal.com Nov. 9, 2012

Nov. 9, 2012

Does anyone know the TCP Dump commands for the Adtran TA908e CLI? *Thanks-* Zak Rupas Tier 3 Engineer Support: 303-242-8606 option 1 Like SimpleSignal on *Facebook <http://www.facebook.com/SimpleSignal> !* SimpleSignal Inc. 3600 S. Yosemite Street Suite 150 Denver, CO 80237 [image: Description: Description: cid:image001.png at 01CBDE2D.5E1CC730]

4 5

SIPRoutes
by BrandonB＠netins.com July 6, 2012

July 6, 2012

Does anyone have any experience with SIPRoutes (siproutes.com)? It seems too good to be true, so of course I'm worried. Feel free to contact me offline or on. Thanks, --- Brandon P. Buckner Switching Technician / VoIP Admin Iowa Network Services brandonb at netins.com<mailto:brandonb at netins.com>

5 6

Broadsoft/AMS/Firmware woes
by RDawson＠alliedtelecom.net May 9, 2012

May 9, 2012

For everyone running AMS - what do you deal with all the Cisco firmware peculiarities, reboot loops from incompatible firmwares, trying to onboard phones that have old firmwares that need an interim upgrade, etc. This is a highly manual process for us right now and a huge pain. Any thoughts/suggestions appreciated. Thanks, Rob

3 2

HP ProCurve 24 Port POE Switch + AVAYA 4612s
by jhellenthal＠dataix.net April 27, 2012

April 27, 2012

Hi all, Question for anyone that may be able to clue me in here... We have a mix of Subject titled equipment that has been in use for a while for what seems to be flawlessly. Every once in a while we will have a 4612 PoE Phone go unresponsive or into a state where it cannot discover its destination and needs to be power cycled to get it back up and running. When we power cycle the PoE 4612 we find out that other 4612s on the same ProCurve switch suddenly get knocked out almost as if the PoE for there ports have been turned off and back on while we power cycled the problem phone. Has anyone came across this before ? Any recomendations would be greatly appreciated as we are fairly well stumped by this. ? Appologies if this may be the wrong list for this. -- - (2^(N-1))

1 0

Broadworks Customer Portal
by RDawson＠alliedtelecom.net April 27, 2012

April 27, 2012

Looking to see what solutions are popular, particularly interested if anyone has done any customization of the native portal and if there are any recommendations for developers specializing in that type of work. Also interested to hear experiences with Loki. Thanks, Rob

3 2

Verizon outage in NE
by David.Hiers＠adp.com April 26, 2012

April 26, 2012

How's things working for your Verizon sites up in the NE this morning? David This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.

3 2

Broadworks/Cisco AS5300/T.38 config
by matthew＠corp.crocker.com April 25, 2012

April 25, 2012

Does anyone have a working t38 config for a Cisco AS5300 with Broadworks they can share? I can get the calls to go through but as soon as the NSE/8000 event comes in the calls disconnect. Linksys SPA-2102 <-> Cisco AS5300. Linksys is using NSE/8000, Cisco is using X-NSE/8000. Thanks -Matt -- Matthew S. Crocker President Crocker Communications, Inc. PO BOX 710 Greenfield, MA 01302-0710 http://www.crocker.com P: 413-746-2760

1 0

Broadworks media server not playing well with early media
by jmyhre＠trumobility.com April 25, 2012

April 25, 2012

I seem to be having a problem with Broadworks thinking an early media stream has ended. I'm sending a call out to the PSTN and receiving back a 183 with SDP (presumably early media). Broadworks is dutifully passing everything down to the device. I'm then receiving a second 183, this time with no SDP (presumably because someone's gateway received a CPG). In this case, Broadworks appears to interpret the lack of SDP as meaning the early media has ended (not the case) and plumbs the media server into the bearer path to play ringing. Anyone run into this problem? Any ideas for a way around it? I've found a reference for dealing with this problem from the access side, but not when the 183s are coming from the network side. I'm running Broadworks Rel14sp4. Many thanks for any ideas! /John

2 3

genband SBC 7.1 question
by zavoid＠gmail.com April 25, 2012

April 25, 2012

Does anyone know how to disable or turnoff support for RFC 3326 sip REASON headers in version 7.1 of genband SBC's.. either on a per trunk or global setting. I want to make sure those HEADERS are not inserted into the SIP response messages sent since they are basically useless and I have a customer who is acting on them instead of the SIP responses. Thanks, Colin

1 1

question about fios
by shripald＠gmail.com April 20, 2012

April 20, 2012

hey all, another ITSP happened to mention to me that Verizon FIOS services were having one-way audio issues yesterday. Since most of our customers connect privately back to our network. i didn't think much of it, however, we do have a couple of clients coming to us publicly via fios. they are experiencing the same the issue right now. Has anyone heard or experienced anything with regard to this issue? thanks, shri

3 4