VoiceOps
By thread
voiceops@voiceops.org
By month
Messages by month
- ----- 2026 -----
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2025 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2015 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2014 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2013 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2012 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2011 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2010 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2009 -----
- December
- November
- October
- September
- August
- July
September 2020
- 33 participants
- 86 messages
TNS Outage?
by ptimmins@clearrate.com
We use them for CNAM/LNP/TF lookups and aren't seeing issues. We don't get our A Links from them though.
________________________________
From: VoiceOps <voiceops-bounces at voiceops.org> on behalf of randal k <rkohutek at gmail.com>
Sent: Wednesday, September 9, 2020 3:03 PM
To: VoiceOps
Subject: [VoiceOps] TNS Outage?
We have redundant A-Links to TNS and both are hard down. Ticket is
open, but no ETR. Anybody have an idea what's happening?
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops
Sept. 9, 2020
TNS Outage?
by rkohutek@gmail.com
We have redundant A-Links to TNS and both are hard down. Ticket is
open, but no ETR. Anybody have an idea what's happening?
Sept. 9, 2020
More Question about routing
by marylou@backuptelecom.com
Brett at the STI-GA told me the same thing. To get your Federal or State
Permission you either have to apply to the FCC to get your IPES
Numbering Authorization or you have to apply to each state to be
certified as a CLEC. I don't know why they had to muddy the waters by
stating you needed authority to get numbering resources from the pooling
administration when the requirement was really to have an FCC
authorization or State Certification. As with most things in Telecom,
certain players in the industry go to great lengths to make even the
simplest tasks seem difficult just so new companies will be discouraged
from entering the market. Those players will go unnamed, but it's not
the iconectiv people!
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-09 10:50 AM, Dave Frigen wrote:
> OK, hot off the press from ATIS, the U.S. SHAKEN General Authority?.
>
> Nothing has changed in the STIR/SHAKEN application process. Each
> service provider (SP) will need to apply through the PA to be able to
> participate in the SHAKEN ecosystem. The FCC is recently concerned
> because several providers using wholesale number pools to operate
> today are now applying for numbers out of the national pool.
>
> Actually acquiring numbers out of the national pool is not necessary.
> The only current numbering pool requirement is that you are a national
> or state registered SP that HAS ACCESS TO NATIONAL NUMBER POOLS (you
> don?t actually need to possess any of your own numbers?..continue
> to use wholesale resources to operate).
>
> So in closing, you do not need your own phone numbers to operate. You
> just need federal or state permission to access the national number
> pool as one of the credentials and qualifiers to become a registered
> SP with the PA.
>
> Dave
>
> From: VoiceOps <voiceops-bounces at voiceops.org> On Behalf Of Zilk,
> David
> Sent: Tuesday, September 8, 2020 4:20 PM
> To: voiceops at voiceops.org
> Subject: [VoiceOps] More Question about routing
>
> Having come into telephony from the data networking end, rather than
> from a PSTN telephony background, where would one find a good basic
> to detailed tutorial of how routing of VoIP calls into the PSTN and
> vice versa works?
>
> I have so far only been involved with routing from our SIP platform to
> and from wholesale service providers, and have not yet had to manage
> our own numbers and peering. With STIR/SHAKEN we may need to get into
> that, and I need to get up to speed.
>
> Thanks,
>
> David
>
> From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of
> Richard Jobson
> Sent: Tuesday, September 8, 2020 12:44 PM
> To: Glen Gerhard <glen at cognexus.net>; voiceops at voiceops.org
> Subject: Re: [VoiceOps] Question about SS7 routing
>
> Hi Ross
>
> So in your original email you were wondering about the role of MTP,
> the layer 3 protocol. This keeps tabs on the point codes. If you are
> troubleshooting down to the SS7 messages (MSU?s), SLTM?s &
> SLTA?s tell you what point codes those links are reaching.
>
> The Global Title Translation uses the SCCP/SS7 protocol when
> connecting to IXC.
>
> Local Number Portability uses AIN/TCAP to dip the database to
> determine the LRN. But many SS7 operations just troubleshoot this by
> looking at the ISUP protocol where the original calling Party number
> (CGN) appears in the Generic Address Part GAP and the LRN in the
> called party number (CDN) field.
>
> Cheers
>
> Richard
>
> From: VoiceOps <voiceops-bounces at voiceops.org> on behalf of Glen
> Gerhard <glen at cognexus.net>
> Date: Tuesday, September 8, 2020 at 11:47 AM
> To: <voiceops at voiceops.org>
> Subject: Re: [VoiceOps] Question about SS7 routing
>
> Hi Ross,
>
> Unless you have an SS7 trunk to an ILEC you don't need to worry much
> about the Point Code. For SIP traffic you just dip the call and route
> on the LRN.
>
> The Point Code itself is a special format that is assigned to you when
> you set up your SS7 capable switch. Unless you have one of them you
> never need to worry about it.
>
> ========
>
> ANSI Point Codes
> ANSI point codes are made up of three groups of digits called the
> network indicator (NI), network cluster (NC), and network cluster
> member (NCM). The values for ANSI point codes depends on the value of
> the pctype parameter of the chg-sid command, either ansi or other. If
> the pctype parameter is set to ansi, the ANSI rules for the ANSI point
> code are used to define the point code. The range of values for an
> ANSI point code with the pctype=ansi parameter are:
>
> NI ? 001-255
> NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
> NCM ? 000-255, *
> The pctype=other parameter specifies that the ANSI point codes do not
> meet ANSI standards. The range of values for ANSI point codes with the
> pctype=other parameter are:
>
> NI ? 000-255
> NC ? 000-255, *
> NCM ? 000-255, *
> The asterisk (*) point code value indicates a single cluster address
> for a cluster point code (for example, 20-2-*) or a network routing
> destination (21-*-*). for more information on cluster point codes, see
> the Cluster Routing and Management Diversity (CRMD) section. For more
> information on network routing point codes, see the Network Routing
> section.
>
> A double asterisk (**) and triple asterisk (***) can also be used for
> the NC and NCM fields of the ANSI point code, but for only the
> rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
>
> A double asterisk in the NCM field of a point code (for example,
> 20-2-**) produces a summary report that shows all point code
> destinations or routes residing in the given cluster (20-2). This does
> not include the cluster point code, if the cluster point code (for
> example, 20-2-*) is provisioned. The following examples (rtrv-dstn and
> rtrv-rte) are reports generated using two asterisks in the NCM field
> of a point code.
> =======
>
> ~Glen
>
> On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
>
>> I'll try to make this as short and sweet as possible even though
>> it's pretty complicated. Point Codes are the 10 digit addresses for
>> a particular switch and LRNs are the 10 digit addresses for a
>> particular connection point that switch is associated with. In the
>> PSTN world, all connections are dedicated and implemented by LATA /
>> Tandem area for Local / IntraLATA traffic. When you get your first
>> NPA-NXX for a LATA / tandem area, you enter it in the LERG (National
>> Routing Database) and populate the tandems (Local, IntraLATA and
>> FGD) that you are connecting to. Then you assign a 10 digit phone
>> number from your NXX block to be your LRN. You add that to both the
>> LERG and NPAC (National Porting Database).
>>
>> Once you've published all your switch information in the LERG and
>> NPAC, then you establish your ISUP trunks with each ILEC you're
>> interconnecting with. You can set up additional trunks with other
>> carriers if you want a cheaper option for routing traffic, but the
>> minimum required is the ILEC. Each carrier's switch will have a
>> distinct point code associated with it so you'll order ISUP trunks
>> to each switch (point code route) you need to be connected to.
>> You'll also associate the distinct LRN for that LATA / carrier
>> tandem area with that trunk group. Usually there's multiple trunk
>> groups per LATA / tandem area so you'll program your routing tables
>> with the NPA-NXXs each trunk group serves. That way when a customer
>> originates a call, your switch can do the LNP dip to find the LRN
>> and send it over the route that the NPA-NXX of the LRN is associated
>> with. Routing tables can get complicated depending on how many
>> carriers you're connected to. Companies that operate in more than
>> one ILEC area or LATA usually purchase Least Cost Routing software
>> so they can send their originating traffic out over the cheapest
>> route.
>>
>> IXC traffic is routed a little differently because it is routed by
>> CIC (4 digit code that identifies the IXC) rather than by NPA-NXX.
>> They connect to all the ILEC carriers just like the CLECs do, but
>> they populate their routing information in the SMS database instead
>> of the NPAC database. Once the call is dipped, the traffic is
>> delivered in pretty much the same way.....by dedicated trunk group /
>> tandem area.
>>
>> MARY LOU CAREY
>> BackUP Telecom Consulting
>> Office: 615-791-9969
>> Cell: 615-796-1111
>>
>> On 2020-09-02 04:46 PM, Ross Tajvar wrote:
>>
>>> Hi all,
>>>
>>> I'm trying to understand how routing works in SS7-land. I am
>>> familiar
>>> with portability, and I know (at least in the US) the first step
>>> in
>>> routing a call is doing an LNP dip to get the LRN.
>>>
>>> However, it looks like addresses in MTP3 are "point codes" (PCs)
>>> which
>>> are assigned to switches. Calls are set up with ISDN-UP, which is
>>> transported via MTP3. So in order for a call to be set up, the
>>> destination switch's PC must be known. How is the destination PC
>>> determined from the destination LRN?
>>>
>>> Thanks,
>>> Ross
>>> _______________________________________________
>>> VoiceOps mailing list
>>> VoiceOps at voiceops.org
>>> https://puck.nether.net/mailman/listinfo/voiceops [1]
>>
>> _______________________________________________
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
>> https://puck.nether.net/mailman/listinfo/voiceops [1]
>
> --
>
> Glen Gerhard
>
> glen at cognexus.net
>
> 858.324.4536
>
> Cognexus, LLC
>
> 7891 Avenida Kirjah
>
> San Diego, CA 92037
>
> _______________________________________________ VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
> -------------------------
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential. If the reader of the message is not the intended
> recipient or an authorized representative of the intended recipient,
> you are hereby notified that any dissemination of this communication
> is strictly prohibited. If you have received this communication in
> error, notify the sender immediately by return email and delete the
> message and any attachments from your system.
>
> Links:
> ------
> [1]
> https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
Sept. 9, 2020
More Question about routing
by dfrigen@wabash.net
OK, hot off the press from ATIS, the U.S. SHAKEN General Authority?.
Nothing has changed in the STIR/SHAKEN application process. Each service provider (SP) will need to apply through the PA to be able to participate in the SHAKEN ecosystem. The FCC is recently concerned because several providers using wholesale number pools to operate today are now applying for numbers out of the national pool.
Actually acquiring numbers out of the national pool is not necessary. The only current numbering pool requirement is that you are a national or state registered SP that HAS ACCESS TO NATIONAL NUMBER POOLS (you don?t actually need to possess any of your own numbers?..continue to use wholesale resources to operate).
So in closing, you do not need your own phone numbers to operate. You just need federal or state permission to access the national number pool as one of the credentials and qualifiers to become a registered SP with the PA.
Dave
From: VoiceOps <voiceops-bounces at voiceops.org> On Behalf Of Zilk, David
Sent: Tuesday, September 8, 2020 4:20 PM
To: voiceops at voiceops.org
Subject: [VoiceOps] More Question about routing
Having come into telephony from the data networking end, rather than from a PSTN telephony background, where would one find a good basic to detailed tutorial of how routing of VoIP calls into the PSTN and vice versa works?
I have so far only been involved with routing from our SIP platform to and from wholesale service providers, and have not yet had to manage our own numbers and peering. With STIR/SHAKEN we may need to get into that, and I need to get up to speed.
Thanks,
David
From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Richard Jobson
Sent: Tuesday, September 8, 2020 12:44 PM
To: Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >; voiceops at voiceops.org <mailto:voiceops at voiceops.org>
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross
So in your original email you were wondering about the role of MTP, the layer 3 protocol. This keeps tabs on the point codes. If you are troubleshooting down to the SS7 messages (MSU?s), SLTM?s & SLTA?s tell you what point codes those links are reaching.
The Global Title Translation uses the SCCP/SS7 protocol when connecting to IXC.
Local Number Portability uses AIN/TCAP to dip the database to determine the LRN. But many SS7 operations just troubleshoot this by looking at the ISUP protocol where the original calling Party number (CGN) appears in the Generic Address Part GAP and the LRN in the called party number (CDN) field.
Cheers
Richard
From: VoiceOps <voiceops-bounces at voiceops.org <mailto:voiceops-bounces at voiceops.org> > on behalf of Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >
Date: Tuesday, September 8, 2020 at 11:47 AM
To: <voiceops at voiceops.org <mailto:voiceops at voiceops.org> >
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross,
Unless you have an SS7 trunk to an ILEC you don't need to worry much about the Point Code. For SIP traffic you just dip the call and route on the LRN.
The Point Code itself is a special format that is assigned to you when you set up your SS7 capable switch. Unless you have one of them you never need to worry about it.
========
ANSI Point Codes
ANSI point codes are made up of three groups of digits called the network indicator (NI), network cluster (NC), and network cluster member (NCM). The values for ANSI point codes depends on the value of the pctype parameter of the chg-sid command, either ansi or other. If the pctype parameter is set to ansi, the ANSI rules for the ANSI point code are used to define the point code. The range of values for an ANSI point code with the pctype=ansi parameter are:
NI ? 001-255
NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
NCM ? 000-255, *
The pctype=other parameter specifies that the ANSI point codes do not meet ANSI standards. The range of values for ANSI point codes with the pctype=other parameter are:
NI ? 000-255
NC ? 000-255, *
NCM ? 000-255, *
The asterisk (*) point code value indicates a single cluster address for a cluster point code (for example, 20-2-*) or a network routing destination (21-*-*). for more information on cluster point codes, see the Cluster Routing and Management Diversity (CRMD) section. For more information on network routing point codes, see the Network Routing section.
A double asterisk (**) and triple asterisk (***) can also be used for the NC and NCM fields of the ANSI point code, but for only the rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
A double asterisk in the NCM field of a point code (for example, 20-2-**) produces a summary report that shows all point code destinations or routes residing in the given cluster (20-2). This does not include the cluster point code, if the cluster point code (for example, 20-2-*) is provisioned. The following examples (rtrv-dstn and rtrv-rte) are reports generated using two asterisks in the NCM field of a point code.
=======
~Glen
On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
I'll try to make this as short and sweet as possible even though it's pretty complicated. Point Codes are the 10 digit addresses for a particular switch and LRNs are the 10 digit addresses for a particular connection point that switch is associated with. In the PSTN world, all connections are dedicated and implemented by LATA / Tandem area for Local / IntraLATA traffic. When you get your first NPA-NXX for a LATA / tandem area, you enter it in the LERG (National Routing Database) and populate the tandems (Local, IntraLATA and FGD) that you are connecting to. Then you assign a 10 digit phone number from your NXX block to be your LRN. You add that to both the LERG and NPAC (National Porting Database).
Once you've published all your switch information in the LERG and NPAC, then you establish your ISUP trunks with each ILEC you're interconnecting with. You can set up additional trunks with other carriers if you want a cheaper option for routing traffic, but the minimum required is the ILEC. Each carrier's switch will have a distinct point code associated with it so you'll order ISUP trunks to each switch (point code route) you need to be connected to. You'll also associate the distinct LRN for that LATA / carrier tandem area with that trunk group. Usually there's multiple trunk groups per LATA / tandem area so you'll program your routing tables with the NPA-NXXs each trunk group serves. That way when a customer originates a call, your switch can do the LNP dip to find the LRN and send it over the route that the NPA-NXX of the LRN is associated with. Routing tables can get complicated depending on how many carriers you're connected to. Companies that operate in more than one ILEC area or LATA usually purchase Least Cost Routing software so they can send their originating traffic out over the cheapest route.
IXC traffic is routed a little differently because it is routed by CIC (4 digit code that identifies the IXC) rather than by NPA-NXX. They connect to all the ILEC carriers just like the CLECs do, but they populate their routing information in the SMS database instead of the NPAC database. Once the call is dipped, the traffic is delivered in pretty much the same way.....by dedicated trunk group / tandem area.
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-02 04:46 PM, Ross Tajvar wrote:
Hi all,
I'm trying to understand how routing works in SS7-land. I am familiar
with portability, and I know (at least in the US) the first step in
routing a call is doing an LNP dip to get the LRN.
However, it looks like addresses in MTP3 are "point codes" (PCs) which
are assigned to switches. Calls are set up with ISDN-UP, which is
transported via MTP3. So in order for a call to be set up, the
destination switch's PC must be known. How is the destination PC
determined from the destination LRN?
Thanks,
Ross
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
--
Glen Gerhard
glen at cognexus.net <mailto:glen at cognexus.net>
858.324.4536
Cognexus, LLC
7891 Avenida Kirjah
San Diego, CA 92037
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org> https://puck.nether.net/mailman/listinfo/voiceops
_____
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.
Sept. 9, 2020
More Question about routing
by marylou@backuptelecom.com
True, but you still have to be certified as an IPES (Interconnected VOIP
provider) to get a STIR/SHAKEN certificate so you have to apply to the
FCC for that piece.
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-09 08:50 AM, Dave Frigen wrote:
> FYI, you do not need your own number pool to apply for STIR/SAHKEN.
> You can use your wholesale provider?s credentials for numbering pool
> requirement. Talk to iconective (PA/Policy Administrator) for details.
>
> Dave
>
> From: VoiceOps <voiceops-bounces at voiceops.org> On Behalf Of Zilk,
> David
> Sent: Tuesday, September 8, 2020 4:20 PM
> To: voiceops at voiceops.org
> Subject: [VoiceOps] More Question about routing
>
> Having come into telephony from the data networking end, rather than
> from a PSTN telephony background, where would one find a good basic
> to detailed tutorial of how routing of VoIP calls into the PSTN and
> vice versa works?
>
> I have so far only been involved with routing from our SIP platform to
> and from wholesale service providers, and have not yet had to manage
> our own numbers and peering. With STIR/SHAKEN we may need to get into
> that, and I need to get up to speed.
>
> Thanks,
>
> David
>
> From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of
> Richard Jobson
> Sent: Tuesday, September 8, 2020 12:44 PM
> To: Glen Gerhard <glen at cognexus.net>; voiceops at voiceops.org
> Subject: Re: [VoiceOps] Question about SS7 routing
>
> Hi Ross
>
> So in your original email you were wondering about the role of MTP,
> the layer 3 protocol. This keeps tabs on the point codes. If you are
> troubleshooting down to the SS7 messages (MSU?s), SLTM?s &
> SLTA?s tell you what point codes those links are reaching.
>
> The Global Title Translation uses the SCCP/SS7 protocol when
> connecting to IXC.
>
> Local Number Portability uses AIN/TCAP to dip the database to
> determine the LRN. But many SS7 operations just troubleshoot this by
> looking at the ISUP protocol where the original calling Party number
> (CGN) appears in the Generic Address Part GAP and the LRN in the
> called party number (CDN) field.
>
> Cheers
>
> Richard
>
> From: VoiceOps <voiceops-bounces at voiceops.org> on behalf of Glen
> Gerhard <glen at cognexus.net>
> Date: Tuesday, September 8, 2020 at 11:47 AM
> To: <voiceops at voiceops.org>
> Subject: Re: [VoiceOps] Question about SS7 routing
>
> Hi Ross,
>
> Unless you have an SS7 trunk to an ILEC you don't need to worry much
> about the Point Code. For SIP traffic you just dip the call and route
> on the LRN.
>
> The Point Code itself is a special format that is assigned to you when
> you set up your SS7 capable switch. Unless you have one of them you
> never need to worry about it.
>
> ========
>
> ANSI Point Codes
> ANSI point codes are made up of three groups of digits called the
> network indicator (NI), network cluster (NC), and network cluster
> member (NCM). The values for ANSI point codes depends on the value of
> the pctype parameter of the chg-sid command, either ansi or other. If
> the pctype parameter is set to ansi, the ANSI rules for the ANSI point
> code are used to define the point code. The range of values for an
> ANSI point code with the pctype=ansi parameter are:
>
> NI ? 001-255
> NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
> NCM ? 000-255, *
> The pctype=other parameter specifies that the ANSI point codes do not
> meet ANSI standards. The range of values for ANSI point codes with the
> pctype=other parameter are:
>
> NI ? 000-255
> NC ? 000-255, *
> NCM ? 000-255, *
> The asterisk (*) point code value indicates a single cluster address
> for a cluster point code (for example, 20-2-*) or a network routing
> destination (21-*-*). for more information on cluster point codes, see
> the Cluster Routing and Management Diversity (CRMD) section. For more
> information on network routing point codes, see the Network Routing
> section.
>
> A double asterisk (**) and triple asterisk (***) can also be used for
> the NC and NCM fields of the ANSI point code, but for only the
> rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
>
> A double asterisk in the NCM field of a point code (for example,
> 20-2-**) produces a summary report that shows all point code
> destinations or routes residing in the given cluster (20-2). This does
> not include the cluster point code, if the cluster point code (for
> example, 20-2-*) is provisioned. The following examples (rtrv-dstn and
> rtrv-rte) are reports generated using two asterisks in the NCM field
> of a point code.
> =======
>
> ~Glen
>
> On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
>
>> I'll try to make this as short and sweet as possible even though
>> it's pretty complicated. Point Codes are the 10 digit addresses for
>> a particular switch and LRNs are the 10 digit addresses for a
>> particular connection point that switch is associated with. In the
>> PSTN world, all connections are dedicated and implemented by LATA /
>> Tandem area for Local / IntraLATA traffic. When you get your first
>> NPA-NXX for a LATA / tandem area, you enter it in the LERG (National
>> Routing Database) and populate the tandems (Local, IntraLATA and
>> FGD) that you are connecting to. Then you assign a 10 digit phone
>> number from your NXX block to be your LRN. You add that to both the
>> LERG and NPAC (National Porting Database).
>>
>> Once you've published all your switch information in the LERG and
>> NPAC, then you establish your ISUP trunks with each ILEC you're
>> interconnecting with. You can set up additional trunks with other
>> carriers if you want a cheaper option for routing traffic, but the
>> minimum required is the ILEC. Each carrier's switch will have a
>> distinct point code associated with it so you'll order ISUP trunks
>> to each switch (point code route) you need to be connected to.
>> You'll also associate the distinct LRN for that LATA / carrier
>> tandem area with that trunk group. Usually there's multiple trunk
>> groups per LATA / tandem area so you'll program your routing tables
>> with the NPA-NXXs each trunk group serves. That way when a customer
>> originates a call, your switch can do the LNP dip to find the LRN
>> and send it over the route that the NPA-NXX of the LRN is associated
>> with. Routing tables can get complicated depending on how many
>> carriers you're connected to. Companies that operate in more than
>> one ILEC area or LATA usually purchase Least Cost Routing software
>> so they can send their originating traffic out over the cheapest
>> route.
>>
>> IXC traffic is routed a little differently because it is routed by
>> CIC (4 digit code that identifies the IXC) rather than by NPA-NXX.
>> They connect to all the ILEC carriers just like the CLECs do, but
>> they populate their routing information in the SMS database instead
>> of the NPAC database. Once the call is dipped, the traffic is
>> delivered in pretty much the same way.....by dedicated trunk group /
>> tandem area.
>>
>> MARY LOU CAREY
>> BackUP Telecom Consulting
>> Office: 615-791-9969
>> Cell: 615-796-1111
>>
>> On 2020-09-02 04:46 PM, Ross Tajvar wrote:
>>
>>> Hi all,
>>>
>>> I'm trying to understand how routing works in SS7-land. I am
>>> familiar
>>> with portability, and I know (at least in the US) the first step
>>> in
>>> routing a call is doing an LNP dip to get the LRN.
>>>
>>> However, it looks like addresses in MTP3 are "point codes" (PCs)
>>> which
>>> are assigned to switches. Calls are set up with ISDN-UP, which is
>>> transported via MTP3. So in order for a call to be set up, the
>>> destination switch's PC must be known. How is the destination PC
>>> determined from the destination LRN?
>>>
>>> Thanks,
>>> Ross
>>> _______________________________________________
>>> VoiceOps mailing list
>>> VoiceOps at voiceops.org
>>> https://puck.nether.net/mailman/listinfo/voiceops [1]
>>
>> _______________________________________________
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
>> https://puck.nether.net/mailman/listinfo/voiceops [1]
>
> --
>
> Glen Gerhard
>
> glen at cognexus.net
>
> 858.324.4536
>
> Cognexus, LLC
>
> 7891 Avenida Kirjah
>
> San Diego, CA 92037
>
> _______________________________________________ VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
> -------------------------
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential. If the reader of the message is not the intended
> recipient or an authorized representative of the intended recipient,
> you are hereby notified that any dissemination of this communication
> is strictly prohibited. If you have received this communication in
> error, notify the sender immediately by return email and delete the
> message and any attachments from your system.
>
> Links:
> ------
> [1]
> https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
Sept. 9, 2020
More Question about routing
by dfrigen@wabash.net
FYI, you do not need your own number pool to apply for STIR/SAHKEN. You can use your wholesale provider?s credentials for numbering pool requirement. Talk to iconective (PA/Policy Administrator) for details.
Dave
From: VoiceOps <voiceops-bounces at voiceops.org> On Behalf Of Zilk, David
Sent: Tuesday, September 8, 2020 4:20 PM
To: voiceops at voiceops.org
Subject: [VoiceOps] More Question about routing
Having come into telephony from the data networking end, rather than from a PSTN telephony background, where would one find a good basic to detailed tutorial of how routing of VoIP calls into the PSTN and vice versa works?
I have so far only been involved with routing from our SIP platform to and from wholesale service providers, and have not yet had to manage our own numbers and peering. With STIR/SHAKEN we may need to get into that, and I need to get up to speed.
Thanks,
David
From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Richard Jobson
Sent: Tuesday, September 8, 2020 12:44 PM
To: Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >; voiceops at voiceops.org <mailto:voiceops at voiceops.org>
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross
So in your original email you were wondering about the role of MTP, the layer 3 protocol. This keeps tabs on the point codes. If you are troubleshooting down to the SS7 messages (MSU?s), SLTM?s & SLTA?s tell you what point codes those links are reaching.
The Global Title Translation uses the SCCP/SS7 protocol when connecting to IXC.
Local Number Portability uses AIN/TCAP to dip the database to determine the LRN. But many SS7 operations just troubleshoot this by looking at the ISUP protocol where the original calling Party number (CGN) appears in the Generic Address Part GAP and the LRN in the called party number (CDN) field.
Cheers
Richard
From: VoiceOps <voiceops-bounces at voiceops.org <mailto:voiceops-bounces at voiceops.org> > on behalf of Glen Gerhard <glen at cognexus.net <mailto:glen at cognexus.net> >
Date: Tuesday, September 8, 2020 at 11:47 AM
To: <voiceops at voiceops.org <mailto:voiceops at voiceops.org> >
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross,
Unless you have an SS7 trunk to an ILEC you don't need to worry much about the Point Code. For SIP traffic you just dip the call and route on the LRN.
The Point Code itself is a special format that is assigned to you when you set up your SS7 capable switch. Unless you have one of them you never need to worry about it.
========
ANSI Point Codes
ANSI point codes are made up of three groups of digits called the network indicator (NI), network cluster (NC), and network cluster member (NCM). The values for ANSI point codes depends on the value of the pctype parameter of the chg-sid command, either ansi or other. If the pctype parameter is set to ansi, the ANSI rules for the ANSI point code are used to define the point code. The range of values for an ANSI point code with the pctype=ansi parameter are:
NI ? 001-255
NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
NCM ? 000-255, *
The pctype=other parameter specifies that the ANSI point codes do not meet ANSI standards. The range of values for ANSI point codes with the pctype=other parameter are:
NI ? 000-255
NC ? 000-255, *
NCM ? 000-255, *
The asterisk (*) point code value indicates a single cluster address for a cluster point code (for example, 20-2-*) or a network routing destination (21-*-*). for more information on cluster point codes, see the Cluster Routing and Management Diversity (CRMD) section. For more information on network routing point codes, see the Network Routing section.
A double asterisk (**) and triple asterisk (***) can also be used for the NC and NCM fields of the ANSI point code, but for only the rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
A double asterisk in the NCM field of a point code (for example, 20-2-**) produces a summary report that shows all point code destinations or routes residing in the given cluster (20-2). This does not include the cluster point code, if the cluster point code (for example, 20-2-*) is provisioned. The following examples (rtrv-dstn and rtrv-rte) are reports generated using two asterisks in the NCM field of a point code.
=======
~Glen
On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
I'll try to make this as short and sweet as possible even though it's pretty complicated. Point Codes are the 10 digit addresses for a particular switch and LRNs are the 10 digit addresses for a particular connection point that switch is associated with. In the PSTN world, all connections are dedicated and implemented by LATA / Tandem area for Local / IntraLATA traffic. When you get your first NPA-NXX for a LATA / tandem area, you enter it in the LERG (National Routing Database) and populate the tandems (Local, IntraLATA and FGD) that you are connecting to. Then you assign a 10 digit phone number from your NXX block to be your LRN. You add that to both the LERG and NPAC (National Porting Database).
Once you've published all your switch information in the LERG and NPAC, then you establish your ISUP trunks with each ILEC you're interconnecting with. You can set up additional trunks with other carriers if you want a cheaper option for routing traffic, but the minimum required is the ILEC. Each carrier's switch will have a distinct point code associated with it so you'll order ISUP trunks to each switch (point code route) you need to be connected to. You'll also associate the distinct LRN for that LATA / carrier tandem area with that trunk group. Usually there's multiple trunk groups per LATA / tandem area so you'll program your routing tables with the NPA-NXXs each trunk group serves. That way when a customer originates a call, your switch can do the LNP dip to find the LRN and send it over the route that the NPA-NXX of the LRN is associated with. Routing tables can get complicated depending on how many carriers you're connected to. Companies that operate in more than one ILEC area or LATA usually purchase Least Cost Routing software so they can send their originating traffic out over the cheapest route.
IXC traffic is routed a little differently because it is routed by CIC (4 digit code that identifies the IXC) rather than by NPA-NXX. They connect to all the ILEC carriers just like the CLECs do, but they populate their routing information in the SMS database instead of the NPAC database. Once the call is dipped, the traffic is delivered in pretty much the same way.....by dedicated trunk group / tandem area.
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-02 04:46 PM, Ross Tajvar wrote:
Hi all,
I'm trying to understand how routing works in SS7-land. I am familiar
with portability, and I know (at least in the US) the first step in
routing a call is doing an LNP dip to get the LRN.
However, it looks like addresses in MTP3 are "point codes" (PCs) which
are assigned to switches. Calls are set up with ISDN-UP, which is
transported via MTP3. So in order for a call to be set up, the
destination switch's PC must be known. How is the destination PC
determined from the destination LRN?
Thanks,
Ross
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops <https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
--
Glen Gerhard
glen at cognexus.net <mailto:glen at cognexus.net>
858.324.4536
Cognexus, LLC
7891 Avenida Kirjah
San Diego, CA 92037
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org <mailto:VoiceOps at voiceops.org> https://puck.nether.net/mailman/listinfo/voiceops
_____
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.
Sept. 9, 2020
More Question about routing
by David.Zilk@cdk.com
Having come into telephony from the data networking end, rather than from a PSTN telephony background, where would one find a good basic to detailed tutorial of how routing of VoIP calls into the PSTN and vice versa works?
I have so far only been involved with routing from our SIP platform to and from wholesale service providers, and have not yet had to manage our own numbers and peering. With STIR/SHAKEN we may need to get into that, and I need to get up to speed.
Thanks,
David
From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Richard Jobson
Sent: Tuesday, September 8, 2020 12:44 PM
To: Glen Gerhard <glen at cognexus.net>; voiceops at voiceops.org
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross
So in your original email you were wondering about the role of MTP, the layer 3 protocol. This keeps tabs on the point codes. If you are troubleshooting down to the SS7 messages (MSU?s), SLTM?s & SLTA?s tell you what point codes those links are reaching.
The Global Title Translation uses the SCCP/SS7 protocol when connecting to IXC.
Local Number Portability uses AIN/TCAP to dip the database to determine the LRN. But many SS7 operations just troubleshoot this by looking at the ISUP protocol where the original calling Party number (CGN) appears in the Generic Address Part GAP and the LRN in the called party number (CDN) field.
Cheers
Richard
From: VoiceOps <voiceops-bounces at voiceops.org<mailto:voiceops-bounces at voiceops.org>> on behalf of Glen Gerhard <glen at cognexus.net<mailto:glen at cognexus.net>>
Date: Tuesday, September 8, 2020 at 11:47 AM
To: <voiceops at voiceops.org<mailto:voiceops at voiceops.org>>
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross,
Unless you have an SS7 trunk to an ILEC you don't need to worry much about the Point Code. For SIP traffic you just dip the call and route on the LRN.
The Point Code itself is a special format that is assigned to you when you set up your SS7 capable switch. Unless you have one of them you never need to worry about it.
========
ANSI Point Codes
ANSI point codes are made up of three groups of digits called the network indicator (NI), network cluster (NC), and network cluster member (NCM). The values for ANSI point codes depends on the value of the pctype parameter of the chg-sid command, either ansi or other. If the pctype parameter is set to ansi, the ANSI rules for the ANSI point code are used to define the point code. The range of values for an ANSI point code with the pctype=ansi parameter are:
NI ? 001-255
NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
NCM ? 000-255, *
The pctype=other parameter specifies that the ANSI point codes do not meet ANSI standards. The range of values for ANSI point codes with the pctype=other parameter are:
NI ? 000-255
NC ? 000-255, *
NCM ? 000-255, *
The asterisk (*) point code value indicates a single cluster address for a cluster point code (for example, 20-2-*) or a network routing destination (21-*-*). for more information on cluster point codes, see the Cluster Routing and Management Diversity (CRMD) section. For more information on network routing point codes, see the Network Routing section.
A double asterisk (**) and triple asterisk (***) can also be used for the NC and NCM fields of the ANSI point code, but for only the rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
A double asterisk in the NCM field of a point code (for example, 20-2-**) produces a summary report that shows all point code destinations or routes residing in the given cluster (20-2). This does not include the cluster point code, if the cluster point code (for example, 20-2-*) is provisioned. The following examples (rtrv-dstn and rtrv-rte) are reports generated using two asterisks in the NCM field of a point code.
=======
~Glen
On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
I'll try to make this as short and sweet as possible even though it's pretty complicated. Point Codes are the 10 digit addresses for a particular switch and LRNs are the 10 digit addresses for a particular connection point that switch is associated with. In the PSTN world, all connections are dedicated and implemented by LATA / Tandem area for Local / IntraLATA traffic. When you get your first NPA-NXX for a LATA / tandem area, you enter it in the LERG (National Routing Database) and populate the tandems (Local, IntraLATA and FGD) that you are connecting to. Then you assign a 10 digit phone number from your NXX block to be your LRN. You add that to both the LERG and NPAC (National Porting Database).
Once you've published all your switch information in the LERG and NPAC, then you establish your ISUP trunks with each ILEC you're interconnecting with. You can set up additional trunks with other carriers if you want a cheaper option for routing traffic, but the minimum required is the ILEC. Each carrier's switch will have a distinct point code associated with it so you'll order ISUP trunks to each switch (point code route) you need to be connected to. You'll also associate the distinct LRN for that LATA / carrier tandem area with that trunk group. Usually there's multiple trunk groups per LATA / tandem area so you'll program your routing tables with the NPA-NXXs each trunk group serves. That way when a customer originates a call, your switch can do the LNP dip to find the LRN and send it over the route that the NPA-NXX of the LRN is associated with. Routing tables can get complicated depending on how many carriers you're connected to. Companies that operate in more than one ILEC area or LATA usually purchase Least Cost Routing software so they can send their originating traffic out over the cheapest route.
IXC traffic is routed a little differently because it is routed by CIC (4 digit code that identifies the IXC) rather than by NPA-NXX. They connect to all the ILEC carriers just like the CLECs do, but they populate their routing information in the SMS database instead of the NPAC database. Once the call is dipped, the traffic is delivered in pretty much the same way.....by dedicated trunk group / tandem area.
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-02 04:46 PM, Ross Tajvar wrote:
Hi all,
I'm trying to understand how routing works in SS7-land. I am familiar
with portability, and I know (at least in the US) the first step in
routing a call is doing an LNP dip to get the LRN.
However, it looks like addresses in MTP3 are "point codes" (PCs) which
are assigned to switches. Calls are set up with ISDN-UP, which is
transported via MTP3. So in order for a call to be set up, the
destination switch's PC must be known. How is the destination PC
determined from the destination LRN?
Thanks,
Ross
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops<https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops<https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailma…>
--
Glen Gerhard
glen at cognexus.net<mailto:glen at cognexus.net>
858.324.4536
Cognexus, LLC
7891 Avenida Kirjah
San Diego, CA 92037
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org> https://puck.nether.net/mailman/listinfo/voiceops
----------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.
Sept. 8, 2020
Question about SS7 routing
by richard@teraquant.com
Hi Ross
So in your original email you were wondering about the role of MTP, the layer 3 protocol. This keeps tabs on the point codes. If you are troubleshooting down to the SS7 messages (MSU?s), SLTM?s & SLTA?s tell you what point codes those links are reaching.
The Global Title Translation uses the SCCP/SS7 protocol when connecting to IXC.
Local Number Portability uses AIN/TCAP to dip the database to determine the LRN. But many SS7 operations just troubleshoot this by looking at the ISUP protocol where the original calling Party number (CGN) appears in the Generic Address Part GAP and the LRN in the called party number (CDN) field.
Cheers
Richard
???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
From: VoiceOps <voiceops-bounces at voiceops.org> on behalf of Glen Gerhard <glen at cognexus.net>
Date: Tuesday, September 8, 2020 at 11:47 AM
To: <voiceops at voiceops.org>
Subject: Re: [VoiceOps] Question about SS7 routing
Hi Ross,
Unless you have an SS7 trunk to an ILEC you don't need to worry much about the Point Code. For SIP traffic you just dip the call and route on the LRN.
The Point Code itself is a special format that is assigned to you when you set up your SS7 capable switch. Unless you have one of them you never need to worry about it.
========
ANSI Point Codes
ANSI point codes are made up of three groups of digits called the network indicator (NI), network cluster (NC), and network cluster member (NCM). The values for ANSI point codes depends on the value of the pctype parameter of the chg-sid command, either ansi or other. If the pctype parameter is set to ansi, the ANSI rules for the ANSI point code are used to define the point code. The range of values for an ANSI point code with the pctype=ansi parameter are:
NI ? 001-255
NC ? 001-255 (if ni = 001-005) or 000-255, * (if ni = 006-255)
NCM ? 000-255, *
The pctype=other parameter specifies that the ANSI point codes do not meet ANSI standards. The range of values for ANSI point codes with the pctype=other parameter are:
NI ? 000-255
NC ? 000-255, *
NCM ? 000-255, *
The asterisk (*) point code value indicates a single cluster address for a cluster point code (for example, 20-2-*) or a network routing destination (21-*-*). for more information on cluster point codes, see the Cluster Routing and Management Diversity (CRMD) section. For more information on network routing point codes, see the Network Routing section.
A double asterisk (**) and triple asterisk (***) can also be used for the NC and NCM fields of the ANSI point code, but for only the rtrv-dstn, rept-stat-dstn, rtrv-rte, and rept-stat-rte commands.
A double asterisk in the NCM field of a point code (for example, 20-2-**) produces a summary report that shows all point code destinations or routes residing in the given cluster (20-2). This does not include the cluster point code, if the cluster point code (for example, 20-2-*) is provisioned. The following examples (rtrv-dstn and rtrv-rte) are reports generated using two asterisks in the NCM field of a point code.
=======
~Glen
On 9/3/2020 10:55 AM, Mary Lou Carey wrote:
I'll try to make this as short and sweet as possible even though it's pretty complicated. Point Codes are the 10 digit addresses for a particular switch and LRNs are the 10 digit addresses for a particular connection point that switch is associated with. In the PSTN world, all connections are dedicated and implemented by LATA / Tandem area for Local / IntraLATA traffic. When you get your first NPA-NXX for a LATA / tandem area, you enter it in the LERG (National Routing Database) and populate the tandems (Local, IntraLATA and FGD) that you are connecting to. Then you assign a 10 digit phone number from your NXX block to be your LRN. You add that to both the LERG and NPAC (National Porting Database).
Once you've published all your switch information in the LERG and NPAC, then you establish your ISUP trunks with each ILEC you're interconnecting with. You can set up additional trunks with other carriers if you want a cheaper option for routing traffic, but the minimum required is the ILEC. Each carrier's switch will have a distinct point code associated with it so you'll order ISUP trunks to each switch (point code route) you need to be connected to. You'll also associate the distinct LRN for that LATA / carrier tandem area with that trunk group. Usually there's multiple trunk groups per LATA / tandem area so you'll program your routing tables with the NPA-NXXs each trunk group serves. That way when a customer originates a call, your switch can do the LNP dip to find the LRN and send it over the route that the NPA-NXX of the LRN is associated with. Routing tables can get complicated depending on how many carriers you're connected to. Companies that operate in more than one ILEC area or LATA usually purchase Least Cost Routing software so they can send their originating traffic out over the cheapest route.
IXC traffic is routed a little differently because it is routed by CIC (4 digit code that identifies the IXC) rather than by NPA-NXX. They connect to all the ILEC carriers just like the CLECs do, but they populate their routing information in the SMS database instead of the NPAC database. Once the call is dipped, the traffic is delivered in pretty much the same way.....by dedicated trunk group / tandem area.
MARY LOU CAREY
BackUP Telecom Consulting
Office: 615-791-9969
Cell: 615-796-1111
On 2020-09-02 04:46 PM, Ross Tajvar wrote:
Hi all,
I'm trying to understand how routing works in SS7-land. I am familiar
with portability, and I know (at least in the US) the first step in
routing a call is doing an LNP dip to get the LRN.
However, it looks like addresses in MTP3 are "point codes" (PCs) which
are assigned to switches. Calls are set up with ISDN-UP, which is
transported via MTP3. So in order for a call to be set up, the
destination switch's PC must be known. How is the destination PC
determined from the destination LRN?
Thanks,
Ross
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops
--
Glen Gerhard
glen at cognexus.net
858.324.4536
Cognexus, LLC
7891 Avenida Kirjah
San Diego, CA 92037
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
Sept. 8, 2020
Question about SS7 routing
by glen@cognexus.net
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20200908/0c48423c/at…>
Sept. 8, 2020
Google Fi
by shripald@gmail.com
Hi All,
Is there anyone from Google Fi on this list? we have a slammed number
situation and they only have email support to their porting/orders
department.
thanks,
Shri
Sept. 8, 2020