Usually you can use 101- "casual access" codes (special dial plans configured in the softswitch), but it all depends on who you are sending the calls to and what they support. Here is one reference: http://www.phone-bill-busters.com/casual_access.htm And do note this caution: CAUTION - do NOT use the 101-XXX dialing method unless you have an account already set up with the carrier in question, or else the calls made in this fashion may be billed to you at atrociously high rates. If you are doing SS-7 with your ULC there is a field specifically for this and you'd configure that in your calss4/5 switch. Good luck, -Scott From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Robert Dawson Sent: Thursday, March 15, 2012 10:59 AM To: voiceops at voiceops.org Subject: [VoiceOps] Question about PIC codes We have recently received a few requests to PIC their LD. I honestly don't even think that in our current configuration we are capable of doing PICs - just curious if anyone has any experience/pertinent knowledge related to the topic? Thanks, Rob