The difference here is the demarcation point. If you're handing off analog lines, there are two important differences: 1. You're not providing the PBX functionality as part of the telephone service and, 2. You're using a technology that is incapable of sending a different ANI than what's in your switch for each line. So the requirement here is that the e911 ALI address must match the physical location where you have those lines installed. If you are looking to protect yourself from the customer moving to a new location, ATA, PBX and all, you just use a contract provision requiring them to notify you of address changes. You could also require them to have you move the service to the new location for more security there. So, different animal that the hosted PBX question... Mike Mike Ray, MBA, CNE, CTE Astro Companies, LLC 11523 Palm Brush Trail #401 Lakewood Ranch, FL 34202 DIRECT: 941 600-0207 http://www.astrocompanies.com -----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Nathan Anderson Sent: Friday, January 18, 2013 6:32 PM To: 'Jay Hennigan'; 'voiceops at voiceops.org' Subject: Re: [VoiceOps] 911 address policy for company phones at home On Friday, January 18, 2013 3:28 PM, Jay Hennigan <> wrote:
From a practical standpoint, how does this differ from the scenario of a legacy TDM PBX with old-school OPX leased lines? What, if any, are the 9-1-1 requirements there?
*Great* question. Would love to know the answer myself, too. -- Nathan Anderson First Step Internet, LLC nathana at fsr.com _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops