Thanks to all, plenty of good options. From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Tim Bray Sent: Wednesday, January 05, 2011 5:30 PM To: voiceops at voiceops.org Subject: Re: [VoiceOps] "Ring Down" Phone On 05/01/11 21:32, Dawson, Robert wrote: I am sure I have seen these before but I am not turning anything up . . . basically looking for an endpoint with no keypad that is programmed to dial a specified number when it goes off hook - just like a door box. Anyone know of anything offhand? If you want a SIP phone, then easiest/cheapest is a linksys PAP2T with a normal phone. You just do a special bit of dial plan. If it is ok being a speaker phone and screwed to the wall then many people use these door phones: http://www.provu.co.uk/sip-doorphone.html If you want a normal pots phone then we'd normally use interquartz phones. http://www.interquartz.co.uk/telephones.aspx?page=18 -- Tim Bray tim at kooky.org<mailto:tim at kooky.org> | http://www.kooky.org Huddersfield, UK