I have to agree with Matthew on this. We use SPA8000s but have often replaced them with the Adtran TA900 series (904,908,912,916,924 are the models we stock). Especially when faxing has been a problem. Most of the time all the config will take is: voice user 1112223333 connect fxs 0/1 password "password" sip-identity 1112223333 T01 register auth-name "1112223333" password "password" sip-authentication password "password" codec-group G711ONLY We have noticed with a couple of odd ball fax machines we have had to set some fax specific stuff: modem-passthrough t38 t38 redundancy high-speed 2 t38 redundancy low-speed 2 Brian From: matthew at corp.crocker.com Date: Thu, 15 Nov 2012 15:49:16 -0500 To: nick at flhsi.com CC: voiceops at voiceops.org Subject: Re: [VoiceOps] 8 Port ATA Adtran TA 908 ?? Probably overkill but it works and works well -- Matthew S. Crocker President Crocker Communications, Inc. PO BOX 710 Greenfield, MA 01302-0710 E: matthew at crocker.com P: (413) 746-2760 F: (413) 746-3704 W: http://www.crocker.com On Nov 15, 2012, at 3:42 PM, "Nick Olsen" <nick at flhsi.com> wrote: We've used the Cisco/Linksys SPA-8000's And haven't liked them to much. Anyone have any recommendations on an 8 port FXS ATA? Nick Olsen Network Operations (855) FLSPEED x106 _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops