We use this product for our fax solution and it works near flawlessly. We haven't had any complaints about large faxes so I can talk to that specifically. We also use it with a third-party fax provider who ships us the units. I'm not sure if they use a specific firmware. I know faxback also utilizes this product with great success. Shripal
On Mar 16, 2015, at 7:45 PM, Jay Hennigan <jay at west.net> wrote:
We've recently become aware of the Audiocodes MP-202B ATA that sits at a customer premise, captures transmission from a fax machine, and sends it via HTTPS to a remote server. We are considering this as a solution to some specific problematic fax-over-IP situations.
I have a few concerns, and am wondering if anyone on the list has used these units and what your experience is with them, good, bad, or ugly. Specifically:
* Does the ATA receive the entire fax and then send it over HTTPS? If so, is there a limitation on the number of pages or size of data?
* Does the sending fax get an accurate report of failure if the actual destination fax is unreachable (busy, no answer, wrong number, out of paper, etc.) once the transmission is accepted by the local Audiocodes box, or do they get an "OK" report in error?
* What goes on the other end? Is there a bigger version Audiocodes box that connects to a PRI or other TDM connection to the PSTN?
* Are there competing products that we should be considering?
The Audiocodes website is somewhat lacking in terms of technical detail and I have a call into them but wanted to get some feedback from the community about this and similar solutions.
-- Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops