On 27/08/10 12:59, Tony Zunt wrote:
Hey Blair, This is just a guess. It appears that your gateway is receiving 7 digits for the call.
-->Called Party Number i = 0x80, '4987770'
That might be OK, but I'd usually expect/prefer to receive 10 digits incoming in the United States on ISDN. It is completely fine if your area has a different dialing plan.
Normal for NZ, you end up with the local number minus the area code. the dial peers and translation rules are configured accordingly. It's working fine, except when a call comes in where the callerID is blocked. This works fine on the old gateway.
Anyhow, if your gateway is registered to CCM, (and why it shouldn't be?), I believe there is a section in the CUCM Devices>Gateway Record that says, "Inbound Calls > Significant Digits."
Actually, it's sitting in front of a couple of SER boxes, but the call isn't even getting that far. the gateway just seems to be dropping it as soon as it decides that it's got an incomplete number :( I suspect there's some magic config I need to modify on the box to accept these calls. The previous box was running 12.3.17c, new box is running 12.4.24.T3, so bit of a change. Cheers, Blair