If you are running an Acme you can also configure it to tear down sessions once a certain time limit has been reached, and just set it to something implausibly long, such as 5 or 6 hours. I'm certain other SBC manufacturers have similar settings to accomplish the same. On Tue, 2011-06-07 at 15:18 -0500, Frank Bulk wrote:
I was speaking to a developer at Genband about our C15. The softswitch was built by TDM folk, with IP added on later. I'm not surprised that there are certain things mixing that would be assumed in a non-legacy product.
Frank
-----Original Message----- From: Darren Schreiber [mailto:d at d-man.org] Sent: Tuesday, June 07, 2011 2:57 PM To: frnkblk at iname.com; VoiceOps at voiceops.org Subject: Re: [VoiceOps] SIP calls that aren't torn down
Is your softswitch from 1982? ;-)
OK OK I kid... I am seriously curious what you're using though... These are pretty standard in the open-source world and also on phones and ATAs/media gateway hardware, etc.
Maybe you just aren't looking for the right option? Look for anything you can configure known as a "timer" and kick back what you've got...
- Darren