I would look at the CDR or Radius accounting message . Whats wrong in relying in CDR/radius info? -N ________________________________ From: Graham Freeman <graham.freeman at cernio.com> To: voiceops at voiceops.org Sent: Wed, June 9, 2010 4:27:37 PM Subject: [VoiceOps] Automated call completion testing? Hi, folks, I'm on the hunt for an automated call completion testing solution. Criteria: Must test call completion, not just whether the SIP gateway IP is reachable and has low ping/jitter. Must be able to notify defined points of contact (ideally via email) upon reaching a set failure threshold Must be able to test legacy phone numbers (e.g. +14154622991) Must be able to test via configurable routes Should be open-source Should be compatible with Asterisk Should be something I can integrate with one or more of the following: Zenoss, Nagios, AskoziaPBX, pfSense Should be able to test both SIP URIs (e.g. sip:firstname.lastname at cernio.com) and legacy phone numbers (e.g. +14154622991). Any suggestions? thanks, Graham Freeman Cernio Technology Cooperative www.cernio.com graham.freeman at cernio.com _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops