On Thu, Sep 24, 2009 at 11:42 AM, <Rod.Dossouvi.CTR at dot.gov> wrote:
How do you get 9 911 working if you change the outbound trunk to 8?
Well, I haven't done it in CUE, but you could either create a specific dial-peer that matches 9911 and routes out, or create a translation pattern to modifies 9911 to 8911 and then it should route normally. However you match 911 and route it out, do the same for 9911. -Jonathan
-----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jonathan Thurman Sent: Thursday, September 24, 2009 2:20 PM To: VoiceOps Subject: Re: [VoiceOps] Switching dial out using "8" instead of "9"
We make sure that a user can dial 911, 9911, and 8911 (we use 8 for trunk access). ?That should allow anyone in a panic state to be able to dial correctly.
We don't use CUE, but changing the dial peer destination-pattern to 8T instead on 9T should work. ?I would still recommend adding a dial peer for this, at least for a short transition period. ?Just depends on how many users you have.
-Jonathan
On Thu, Sep 24, 2009 at 10:44 AM, ?<Rod.Dossouvi.CTR at dot.gov> wrote:
No plan to change 911 to 8911.
I see how the 911 change can cause some legal issue... J
Rod Dossouvi
Sr Network Engineer
INDUS Corporation FHWA, USDOT 1200 New Jersey Avenue South East Washington, DC 20590 Direct 202-366-9028
Mobile 240-422-4588
________________________________
From: Lunch Hound [mailto:lunchhound9999 at gmail.com] Sent: Thursday, September 24, 2009 1:38 PM To: Scott Berkman Cc: Dossouvi, Rod CTR (FHWA); voiceops at voiceops.org Subject: Re: [VoiceOps] Switching dial out using "8" instead of "9"
Correct.? Phones, feature servers, switches, all can play a role in the "dial 9 for an outside line" function.? On-hook dialing can be treated differently than off-hook.
Are you planning to change emergency dialing from 911 to 8911?? You may want some legal cover here...
On Thu, Sep 24, 2009 at 10:08 AM, Scott Berkman <scott at sberkman.net> wrote:
Reconfiguring the dial plan on whatever system is requiring the 9, if that's even possible.? Some systems have this hard coded.
??????????????? -Scott
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Rod.Dossouvi.CTR at dot.gov Sent: Thursday, September 24, 2009 12:25 PM To: voiceops at voiceops.org Subject: [VoiceOps] Switching dial out using "8" instead of "9"
Hi,
What needs to take place in order to change dial out from "9" to "8"?
Thanks.
Rod Dossouvi
Sr Network Engineer
INDUS Corporation FHWA, USDOT 1200 New Jersey Avenue South East Washington, DC 20590 Direct 202-366-9028
Mobile 240-422-4588
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops