Do you have global-contact configured in the sip-config options tokenizing the contact header? If you dont need the contact-header tokenized like this you can remove global-contact from the sip-config but this is a global setting so be very certain. Alternatively if you need that function elsewhere, just write some HMR to re-write the contact into whatever form MS requires, substituting the from/to or whatever you desire, this is exactly what I have done to work around elements that cannot handle the length of the global-contact header. On Wed, 2009-10-07 at 13:09 -0500, Lee Riemer wrote:
Anyone know how to disable the Contact rewrite? I'm trying to build a PBX in a Metaswitch and the configured SIP binding has an ACME as it's proxy. I have outbound working fine, but it breaks on inbound as the MS is looking for the PBX IP in the Contact header, not the ACME's. I understand the point is for the signaling to come back to the ACME, but the proxy setting in the SIP binding takes care of that.
Lee _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops