Valcom has great support. I would call them and ask them. Most likely you'll need a separate power source. On Thu, Apr 18, 2019, 5:40 PM Darin Steffl <darin.steffl at mnwifi.com> wrote:
Hey guys,
https://www.valcom.com/pdf/v1030c_v1036c.pdf
We're trying to find the best way to interface 3 old Valcom speakers V-1030c to an IP paging system.
I have a Snom PA1 but that won't work as we initially thought because speakers need 4 wires on a 24v power system. So 2 wires are for 24v power, and the other 2 are for audio. The snom only has a positive and negative output that feeds passive speakers, not active speakers like these.
What is the best way to utilize these 3 speakers or should we just replace the speakers? We're trying to keep budget to a minimum for them so we would prefer to utilize the same speakers but what's the best way to power them and feed them audio using the existing 2-pair RJ11 cable they use?
Thank you
-- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi> _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops