On Tue, 5 Jan 2010, Lee Riemer wrote:
I forgot, we had this issue with invalid RTP sequence numbers with old Polycom firmware.?? Are you using Polycom phones?
If that was the case would not his captures of the traffic and the resulting replay be mangled at every point me mentions below? matt
On 1/5/2010 11:31 PM, Ujjval Karihaloo wrote:
I trace a call?on my cell phone I hear the first 1 -2 seconds clipped?however the trace sounds fine?.
?
Traced at SBC side facing Level 3
Traced at SBC side facing Customer (who receives inbound call)
Traced at Customer Prem
?
All the above 3 traces the Audio sounds fine, but on my cell phone I miss the first 2 seconds.
?
Ujjval Karihaloo
?
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Lee Riemer Sent: Tuesday, January 05, 2010 10:15 PM To: voiceops at voiceops.org Subject: Re: [VoiceOps] Delay on RTP for Inbound Calls
?
Have you captured via wireshark and replayed?? Do you hear the same delay?? Is there a delay between the OK (answer) and the audio?
On 1/5/2010 8:22 PM, Ujjval Karihaloo wrote:
Hi Guys;
?
?? We have noticed that sometimes when calling into our DIDs (Level 3 DIDs), there is a 2-3 second lag. i.e. Cell phone caller (party A) calls into a DID (Party B) that is on our network (Broadsoft Softswitch), Party B answers and sayd 1,2,3,4,5 ? but the Party A only hears 4, 5?The part i.e. 1,2,3 get cut off.
?
Plus it is sporadic and difficult to reproduce, was wondering if folks have encountered this and any good troubleshooting techniques you can recommend.
?
Ujjval Karihaloo
?
?
?
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops
?