
Has anyone setup a SIP trunk with Allworx and gotten the Allworx sim ring and call forward allways features to work. Our Customer gets one way audio on forwards and findme-followme kind of scenarios. The RTP and SIP traces are clean for the inbound and outbound leg of the call.. i.e. I can play back RTP both ways in both legs of the call all the way from the Originatig Carrier to the Terminating Carrier... Any ideas/experiences would be appreciated

RTP issues are normally not Broadworks issues. Check with your gateways and see if they are handling the SIP reINVITE properly. You can also test by setting up all aspects of the call on Broadworks to eliminate your carriers. I had a similar problem with Broadworks when calls went through the media server they could only get audio from the media server. It ended up being a bug in my gateway SIP stack that was patched by the vendor. -Matt ----- Original Message -----
From: "Ujjval Karihaloo" <ujjval at simplesignal.com> To: voiceops at voiceops.org Sent: Friday, December 3, 2010 12:23:35 AM Subject: [VoiceOps] Broadsoft and Allworx
Has anyone setup a SIP trunk with Allworx and gotten the Allworx sim ring and call forward allways features to work. Our Customer gets one way audio on forwards and findme-followme kind of scenarios. The RTP and SIP traces are clean for the inbound and outbound leg of the call..
i.e. I can play back RTP both ways in both legs of the call all the way from the Originatig Carrier to the Terminating Carrier...
Any ideas/experiences would be appreciated
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
-- Matthew S. Crocker President Crocker Communications, Inc. PO BOX 710 Greenfield, MA 01302-0710 http://www.crocker.com P: 413-746-2760
participants (2)
-
matthew@corp.crocker.com
-
ujjval@simplesignal.com