Issue with one touch call list buttons on Polycom 501/Broadsoft
We picked up a customer that had a number of 501s. I downloaded the latest firmware, bootrom and configs and created a new device type. Phones boot, provision and register fine however there is no icon displayed for the registered lines and the one touch call list feature does not work. If I boot against the vanilla configs everything is normal, as soon as I boot against the "templated" configs it breaks. I have literally stripped everything out of the configs that I can, they have basic registration information at this point. I have made up dozens of Polycom configurations in the past and never seen this issue. Of course since the device has been out of warranty since 2007 I have to open a PPI ticket so I just wanted to see if anyone may have seen something similar in the past. Thanks, Rob
Dumb question: your configs are packed rather than prettyprinted, right? My 601s wouldn't tolerate prettified xml; they puked. Robert Dawson <RDawson at alliedtelecom.net> wrote:
We picked up a customer that had a number of 501s. I downloaded the latest firmware, bootrom and configs and created a new device type. Phones boot, provision and register fine however there is no icon displayed for the registered lines and the one touch call list feature does not work.
If I boot against the vanilla configs everything is normal, as soon as I boot against the "templated" configs it breaks. I have literally stripped everything out of the configs that I can, they have basic registration information at this point.
I have made up dozens of Polycom configurations in the past and never seen this issue.
Of course since the device has been out of warranty since 2007 I have to open a PPI ticket so I just wanted to see if anyone may have seen something similar in the past.
Thanks, Rob
------------------------------------------------------------------------
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.
Just to make sure you're aware, the Polycom SPIP 501 phones are not supported on newer versions of the SIP application (anything 3.2 or newer) and the configuration files were changed somewhat in version 3.3, breaking backward compatibility. I think Broadsoft used to have CPE kits with templates for Polycom verison 3.1.2-RevB, but I don't see them anymore. You may end up needing to compare the CPE kit template files for the 3.3.1 version to the stock Polycom config files from 3.3.1 to find the differences and then apply them to stock Polycom 3.1.x files. Be sure to download the SoundPoint IP Administrator's Guide - SIP 3.1 to review config syntax if needed. On 02/27/2013 02:37 PM, Robert Dawson wrote:
We picked up a customer that had a number of 501s. I downloaded the latest firmware, bootrom and configs and created a new device type. Phones boot, provision and register fine however there is no icon displayed for the registered lines and the one touch call list feature does not work.
If I boot against the vanilla configs everything is normal, as soon as I boot against the "templated" configs it breaks. I have literally stripped everything out of the configs that I can, they have basic registration information at this point.
I have made up dozens of Polycom configurations in the past and never seen this issue.
Of course since the device has been out of warranty since 2007 I have to open a PPI ticket so I just wanted to see if anyone may have seen something similar in the past.
Thanks,
Rob
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
Thanks for the input all. I resolved this by adding copies of the vanilla config files back to end of the config file list in the "mac.cfg" file. Rob From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Nelson Hicks Sent: Wednesday, February 27, 2013 4:29 PM To: voiceops at voiceops.org Subject: Re: [VoiceOps] Issue with one touch call list buttons on Polycom 501/Broadsoft Just to make sure you're aware, the Polycom SPIP 501 phones are not supported on newer versions of the SIP application (anything 3.2 or newer) and the configuration files were changed somewhat in version 3.3, breaking backward compatibility. I think Broadsoft used to have CPE kits with templates for Polycom verison 3.1.2-RevB, but I don't see them anymore. You may end up needing to compare the CPE kit template files for the 3.3.1 version to the stock Polycom config files from 3.3.1 to find the differences and then apply them to stock Polycom 3.1.x files. Be sure to download the SoundPoint IP Administrator's Guide - SIP 3.1 to review config syntax if needed. On 02/27/2013 02:37 PM, Robert Dawson wrote: We picked up a customer that had a number of 501s. I downloaded the latest firmware, bootrom and configs and created a new device type. Phones boot, provision and register fine however there is no icon displayed for the registered lines and the one touch call list feature does not work. If I boot against the vanilla configs everything is normal, as soon as I boot against the "templated" configs it breaks. I have literally stripped everything out of the configs that I can, they have basic registration information at this point. I have made up dozens of Polycom configurations in the past and never seen this issue. Of course since the device has been out of warranty since 2007 I have to open a PPI ticket so I just wanted to see if anyone may have seen something similar in the past. Thanks, Rob _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org> https://puck.nether.net/mailman/listinfo/voiceops
participants (3)
-
jra＠baylink.com -
nelsonh＠socket.net -
RDawson＠alliedtelecom.net