If you are looking for a T1/Ethernet Cisco 2431-8FXS / 2431-16FXS. On the grey / bay market they are about 500 to 700 depending on which way the wind blows. I have used the Adtran 900 series routers and had a really bad experience with some Mitel SX200s but I have one running with an Intertel that would not work with a Cisco over at T1 port. Linksys has one as well but it?s Ethernet only. I can?t remember the model but it is an 8 port we are using at a very picky customer?s office. Not a word out of him since we turned the box up a month ago. (knock on simulated wood grain) Richey From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of eseifer at comcast.net Sent: Monday, September 14, 2009 6:40 PM To: VoiceOps Subject: [VoiceOps] CPE IAD recommendations Hello, Can anyone recommend a small market Integrated Access Device (IAD) that is capable of being a SIP Trunk endpoint with Broadsoft? I have a few points of criteria that we are looking at: 1. Supports up to 8 FXS ports. 2. Compatible with keyed-system PBX's. 3. Prefer a manufacturer with a strong, responsive support team. 4. Price: around $500. Thanks, Eric