Hey all, Anyone on here that's part of Windstream's Broadsoft deployment group? We're running into a problem where it appears there could be a misconfiguration on a switch. In the initial INVITE message we're receiving, the Diversion header contains the To number - and this is causing our Metaswitch some heartburn in some specific cases (not to our customers). Any assist would be greatly appreciated! Mark INVITE sip:+1706288XXXX at xxx.xxx.xxx.xxx:5060 SIP/2.0 Via: SIP/2.0/UDP xxx.xxx.xxx.xxx:5060;branch=z9hG4bK00B105cb36f4579bb83 From: "ABC" <sip:+1803279XXXX at xxx.xxx.xxx.xxx>;tag=gK00200ada To: <sip: <sip:706288XXXX at xxx.xxx.xxx.xxx> 706288XXXX at xxx.xxx.xxx.xxx> Call-ID: 1191215837_100642076 at xxx.xxx.xxx.xxx <mailto:1191215837_100642076 at xxx.xxx.xxx.xxx> CSeq: 866803 INVITE Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,OPTIONS Accept: application/sdp Contact: "ABC" <sip:+1803279XXXX at xxx.xxx.xxx.xxx:5060> P-Asserted-Identity: "ABC" <sip:+1803279XXXX at xxx.xxx.xxx.xxx:5060> Diversion: <sip:+1706288XXXX at xxx.xxx.xxx.xxx:5060>;privacy=off;screen=no; reason=unconditional; counter=1 Supported: replaces Content-Length: 281 Content-Disposition: session; handling=required Content-Type: application/sdp