Paging system integration with VoIP
This looks great...thanks for the heads up. I will get one to try out....we usually have an available fxs port or two so using the Viking has always been a quick fix and ultra reliable...we have also used the Viking pa2a for paging with loud bell and the m2w to amplify a phone's speaker Todd Wolf COO Unified Technologies 583 Warren Ave Portland, Me 04103 207.591.6902 On Mar 13, 2012, at 9:35 PM, "Jay Taylor" <taylorj at hti-inc.com> wrote:
If you are going to go through the trouble of putting those two items together, you might want to check out Snom's PA1 as an all in one unit. It's POE friendly and has quite a few options of connecting things to it.
I just received three of them and after a quick 2 minute config, I've got paging. I don't do a lot of paging but with something like this, I probably won't use anything else.
Jay
-----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Todd Wolf Sent: Tuesday, March 13, 2012 6:27 PM To: 'Jay Hennigan';voiceops at voiceops.org Subject: Re: [VoiceOps] Paging system integration with VoIP
CISCO PAP2T and a VIKING ELECTRONICS CPA7B
-----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jay Hennigan Sent: Tuesday, March 13, 2012 12:58 PM To: voiceops at voiceops.org Subject: Re: [VoiceOps] Paging system integration with VoIP
On 3/13/12 9:27 AM, Carlos Alvarez wrote:
Does anyone here have advice on connecting a Valcom paging system with a hosted VoIP system? The site is about a thousand miles away so I can't just go play with it. At the most basic level I'm considering just a cheap phone on auto-answer and a connection from its headset jack to the paging amp. Any other ideas?
Bogen makes a paging interface TAM-B that connects to an FXS port on an ATA or TA900 Adtran. Works very well.
Hint: Put it on an extension-only number if possible so that random wrong numbers and telemarketers don't clobber it.
-- Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
Take a look at Cyberdata. http://www.cyberdata.net/products/voip/index.html -----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Todd Wolf Sent: Tuesday, March 13, 2012 9:20 PM To: Jay Taylor Cc: voiceops at voiceops.org Subject: Re: [VoiceOps] Paging system integration with VoIP This looks great...thanks for the heads up. I will get one to try out....we usually have an available fxs port or two so using the Viking has always been a quick fix and ultra reliable...we have also used the Viking pa2a for paging with loud bell and the m2w to amplify a phone's speaker Todd Wolf COO Unified Technologies 583 Warren Ave Portland, Me 04103 207.591.6902 On Mar 13, 2012, at 9:35 PM, "Jay Taylor" <taylorj at hti-inc.com> wrote:
If you are going to go through the trouble of putting those two items together, you might want to check out Snom's PA1 as an all in one unit. It's POE friendly and has quite a few options of connecting things to it.
I just received three of them and after a quick 2 minute config, I've got paging. I don't do a lot of paging but with something like this, I probably won't use anything else.
Jay
-----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Todd Wolf Sent: Tuesday, March 13, 2012 6:27 PM To: 'Jay Hennigan';voiceops at voiceops.org Subject: Re: [VoiceOps] Paging system integration with VoIP
CISCO PAP2T and a VIKING ELECTRONICS CPA7B
-----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jay Hennigan Sent: Tuesday, March 13, 2012 12:58 PM To: voiceops at voiceops.org Subject: Re: [VoiceOps] Paging system integration with VoIP
On 3/13/12 9:27 AM, Carlos Alvarez wrote:
Does anyone here have advice on connecting a Valcom paging system with a hosted VoIP system? The site is about a thousand miles away so I can't just go play with it. At the most basic level I'm considering just a cheap phone on auto-answer and a connection from its headset jack to the paging amp. Any other ideas?
Bogen makes a paging interface TAM-B that connects to an FXS port on an ATA or TA900 Adtran. Works very well.
Hint: Put it on an extension-only number if possible so that random wrong numbers and telemarketers don't clobber it.
-- Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV
VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
_______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
participants (2)
-
chris.veazey＠gmail.com -
twolf＠unifiedtechnologies.com