I followed this forum, but it sort of dead-ends without further posts on a proper config. http://www.shoretelforums.com/forums/installers/1367-shoretel-asterisk-sip-t runk.html My problem is that I am getting: [2010-06-03 13:54:38] NOTICE[18187]: chan_sip.c:8027 sip_reg_timeout: -- Registration for 'user at 10.10.10.2' timed out, trying again (Attempt #176) [2010-06-03 13:54:38] NOTICE[18187]: chan_sip.c:13241 handle_response_register: Failed to authenticate on REGISTER to 'user at 10.10.10.2' (Tries 3) -----Original Message----- From: Darren Schreiber [mailto:d at d-man.org] Sent: Thursday, June 03, 2010 1:51 PM To: Jim Gurol; VoiceOps at voiceops.org Subject: RE: [VoiceOps] Asterisk and Shoretel interop? I would be interested in this also, if you're willing to share :-) -----Original Message----- From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jim Gurol Sent: Thursday, June 03, 2010 1:50 PM To: VoiceOps at voiceops.org Subject: [VoiceOps] Asterisk and Shoretel interop? We normally use Adtran CPE devices <--> asterisk for our customers to do inbound/outbound calling. I am working to configure a customer ShoreTel PBX to use our asterisk for inbound/outbound via SIP trunk so they don't have to use PRI card. Anybody have any sample configs on how this is done? Jim Gurol Engineering California Telecom 213-270-1349 _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops