https://supportcommunity.adtran.com/t5/General/How-to-Perform-a-DSP-capture/...

Unfortunately, it sounds like it might not capture DSP input unless it is a call actually already in progress, and (if the doc is to be believed) is going from IP/RTP to TDM and/or analog, or vice-versa. Ugh.

There's got to be a way...

------ Nathan, ------ I was thinking more to attack it from the Metaswitch side over GR303 to capture a ?wav? file that another user suggested could be analyzed via software. I will have to read some docs as I have never done that with GR303 while I have with a pure SIP call. Of course, I can also ask Meta as well. It should be able to do something for me directly on the UMG which is the Metaswitch part capturing the digits. -- Nathan -----Original Message----- From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Nathan Anderson via VoiceOps Sent: Monday, February 13, 2023 5:21 PM To: Matthew Yaklin Cc: Voice Ops Subject: Re: [VoiceOps] Alarm panels and how they dial DTMF digits - pots migration from DMS to Metaswitch issue Matthew Yaklin wrote:

I have not considered that. I work remotely with all of this gear and I would have to guide a tech to do such a thing. I don't think a butt set and a tape recorder would be sufficient to record the audio which is about all I could possibly scratch up without spending money.

I have to wonder if there is a way to get the Adtran to dump a copy of the audio in digital form to a local file, that you could then pull off the system remotely. It has to A-to-D it at some point in order to process it, right? -- Nathan _______________________________________________ VoiceOps mailing list VoiceOps at voiceops.org https://puck.nether.net/mailman/listinfo/voiceops