- VoiceOps - lists.voiceops.org

Broadsoft and Allworx
by ujjval＠simplesignal.com Dec. 3, 2010

Dec. 3, 2010

Has anyone setup a SIP trunk with Allworx and gotten the Allworx sim ring and call forward allways features to work. Our Customer gets one way audio on forwards and findme-followme kind of scenarios. The RTP and SIP traces are clean for the inbound and outbound leg of the call.. i.e. I can play back RTP both ways in both legs of the call all the way from the Originatig Carrier to the Terminating Carrier... Any ideas/experiences would be appreciated

2 1

Probably OT - Mitel - Adtran
by mylists＠battleop.com Dec. 2, 2010

Dec. 2, 2010

Sorry if this is off topic but I really don't know of a better place to ask this question. I had a customer with a couple of locations that have Mitel SX200 PBXs. Their voice vendor asked us to hand them a Voice T1 out of our CPE which is an Adtran TA904. They told us that the T1 needed to be configured as D4/AMI. After the install the customer experienced dropped calls and the vendor could only really say that everything worked find with the previous carrier so it has to be our problem. After a day or so of trying to figure out the problem I switched to D4/B8ZS because I was out of ideas. As soon as I switched to D4/B8ZS the errors stopped and the calls stopped dropping. I questioned the vendor again and he swears that their side is set for D4/AMI and now he thinks it much be a glitch in the Adtran. I think it's either the vendor didn't look at the config or it's something strange in the Mitel. Has anyone else come across this before? Richey

4 3

Looking for Vonage contact
by matthew＠corp.crocker.com Dec. 2, 2010

Dec. 2, 2010

We ported a number a Vonage customer number away from Vonage last week. The actual carrier was Paetec. The number port completed but Vonage hasn't deleted the number from their system. Customers on Vonage cannot call the number but the rest of the world can. Vonage customer service is worthless, hold -> transfer -> disconnect Does anyone have a contact at Vonage for port out of level 3 support? Thanks -Matt -- Matthew S. Crocker President Crocker Communications, Inc. PO BOX 710 Greenfield, MA 01302-0710 http://www.crocker.com P: 413-746-2760

2 1

Broadworks/Valcom paging solution
by robert.dawson＠mindshift.com Nov. 30, 2010

Nov. 30, 2010

Anyone out there have experience with Valcom paging solutions on Broadworks? This would be a simple application - 1 zone and 2 horns. Any recommendations for other products?

6 5

Strange register attack
by zavoid＠gmail.com Nov. 29, 2010

Nov. 29, 2010

Tonight i'm seeing hundreds of register attempts per second to one of my SBC's from an IP in china 61.142.250.96. the From: and to: line is always one of these 2 below. \"118\" <sip:118 at my SBC IP>; source port 5063 \"qwerty\" <sip:qwerty at my SBC IP>; source port 5067 user-agent: friendly-scanner is always. Looks like sipvicious default user agent. Anyone seen a register flood like this before? Colin

13 17

Difficulties sending calls to Magic Jack
by nicksten＠gmail.com Nov. 23, 2010

Nov. 23, 2010

Anyone else have insight or comments on this fiasco? http://www.examiner.com/christianity-culture-in-san-diego/is-magicjack-high… -N

13 13

Broadsoft/ACME and Solarwinds
by ujjval＠simplesignal.com Nov. 22, 2010

Nov. 22, 2010

Has anyone used Solarwinds SNMP monitoring software for Broadsoft and ACME packet to receive Traps for these devices? Can solarwinds not load the MIB files directly and compile them or do we have to use a MIB walker to create a Trap/MIB-CSV file that we then provide to solarwinds who will include it in their MIB Database and provide an updated database to us for the Solarwinds system? Any help would be appreciated?

4 3

855 Test Number
by scott＠sberkman.net Nov. 22, 2010

Nov. 22, 2010

Does anyone have or know of an 855 (the new TF NPA) number that actually completes I could use for testing? Thanks, -Scott

2 1

Telcordia's LERG
by clechouse＠hotmail.com Nov. 22, 2010

Nov. 22, 2010

Does anyone have any insight into the mystery that is Telcordia's LERG subscription pricing model? It honestly seems to be based on whatever arbitrary basis they can use to squeeze as much money as possible. There doesn't seem to be an sort of clearly defined rate or tier sheet to justify any of it. Also, what are the chances of truly opening these services to competition, like happened with domain registrations so many years ago? ~SP

3 3

Favorite network testing tools
by jvanick＠spruce.oaknet.com Nov. 22, 2010

Nov. 22, 2010

I've seen some threads on pieces of this, but I thought it might be cool to talk about some testing tools.. I'm looking for open source (read modifiable) tools for characterizing and verifying network connections and their reliability for voice (rtp). I've played with ttcp and iperf but they're really not exactly what I'm looking for. I'll need both server and client side (client side preferably something browser (pc) based... What are *YOUR* favorites and why? Thanks! -Jason

1 0