- VoiceOps - lists.voiceops.org

Broadworks: Preserve sip call-ID
by rakeshunni＠gmail.com March 23, 2012

March 23, 2012

Hi guys, We are running r17 at the moment and currently testing a monitoring platform for both signalling and media. They use sip callID to identify call legs to merge and i would like to have all call legs on one call (from the originating access side to where we send the traffic to for PSTN). Since Broadworks act as a B2BUA it rewrites the originating callID to BW-xxxxx. I've made changes on the SBC to preserve the callID but now need Broadworks to preserve it. Is it possible on Broadworks to transparent proxy the callID from the access side to the terminating side ? Thanks Rakesh

10 12

Looking for number for AT&T translations department
by jason＠thebaughers.com March 22, 2012

March 22, 2012

We're an ILEC in West-Central Illinois having trouble originating 800-number calls to CIC 288 (AT&T).Our Central Office has been going around in circles trying to open a trouble with AT&T's translations department. We keep getting the runaround, passed back and forth from one group to another. Does anyone have a good contact number? Thanks

2 1

Latency info using RTCP from SIP end-points
by feby.francis＠crosstel.com March 19, 2012

March 19, 2012

Hello All-, Has anyone played with RTCP parameter on the Linksys phones. I am not able to capture packets with Latency info from them. Thanks, Feby Francis

1 0

Question about PIC codes
by RDawson＠alliedtelecom.net March 15, 2012

March 15, 2012

We have recently received a few requests to PIC their LD. I honestly don't even think that in our current configuration we are capable of doing PICs - just curious if anyone has any experience/pertinent knowledge related to the topic? Thanks, Rob

2 1

Acme Packet University
by peter＠4isps.com March 15, 2012

March 15, 2012

Today is the Acme Packet University and Analyst Day. Some of the tweets had some nuggets I thought I would share: Acme Packet Analyst Event: Now that SBC is standardized, what's preventing others from catching up? Acme Packet CTO MeLampy answer: Complexity has risen; so overwhelming that it's a barrier to entry; APKT hired 200 ppl in the last 18 months to tackle it. Acme Packet CTO: standards complexity is killing the potential for end-user services. Patrick MeLampy discusses the newer complexities of multimedia communications. MeLampy: increased SIP complexity: 215 different RFCs related to SIP, 35 Internet drafts 2012 YTD, 80 Internet Drafts last 6 months @Acme_Packet: MeLampy: all our old competitors tried to solve the sbc problems like a firewall, and they all failed. MeLampy: making a simple call :136 messages , 17 entities , 6 protocols; Session state in 7 difference locations MeLampy: Making a 3GPP call (SIP session layer): Phone registration: 30 messages, 11 entities , 5 protocols. Andy Ory: As service providers are pushing to #LTE there are three problems, the business challenges, tech issues, and complexity Ory: our role in session enablement is to allow for simple implementations, so service providers can compete with free voice services Dan Warren - IMS brings everything good about TDM to an IP level. <so we are back to talking about IMS, huh?> Thank you. Regards, Peter Radizeski RAD-INFO, Inc. - NSP Strategist Bandwidth * Circuits * Consulting 813.963.5884 http://www.rad-info.net/contact.htm

1 0

911 test instructions/sign-off
by carlos＠televolve.com March 14, 2012

March 14, 2012

How do the rest of you handle having customers test their 911 service on installation? Do any of you have them sign off that it's been completed? Any instruction documents you can share? -- Carlos Alvarez TelEvolve 602-889-3003

2 2

Edgemarc Experiences
by sil＠infiltrated.net March 13, 2012

March 13, 2012

Hey all, for those running SBC's (Acmes, Sonus, nCites) and NOT using Broadsoft, how many of you guys have dealt with Edgemarc at the client edge? What were your experiences? -- =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ J. Oquendo SGFA, SGFE, C|EH, CNDA, CHFI, OSCP, CPT, RWSP, GREM "It takes 20 years to build a reputation and five minutes to ruin it. If you think about that, you'll do things differently." - Warren Buffett 42B0 5A53 6505 6638 44BB 3943 2BF7 D83F 210A 95AF http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x2BF7D83F210A95AF

4 5

Paging system integration with VoIP
by twolf＠unifiedtechnologies.com March 13, 2012

March 13, 2012

This looks great...thanks for the heads up. I will get one to try out....we usually have an available fxs port or two so using the Viking has always been a quick fix and ultra reliable...we have also used the Viking pa2a for paging with loud bell and the m2w to amplify a phone's speaker Todd Wolf COO Unified Technologies 583 Warren Ave Portland, Me 04103 207.591.6902 On Mar 13, 2012, at 9:35 PM, "Jay Taylor" <taylorj at hti-inc.com> wrote: > If you are going to go through the trouble of putting those two items together, you might want to check out Snom's PA1 as an all in one unit. It's POE friendly and has quite a few options of connecting things to it. > > I just received three of them and after a quick 2 minute config, I've got paging. I don't do a lot of paging but with something like this, I probably won't use anything else. > > Jay > > -----Original Message----- > From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Todd Wolf > Sent: Tuesday, March 13, 2012 6:27 PM > To: 'Jay Hennigan';voiceops at voiceops.org > Subject: Re: [VoiceOps] Paging system integration with VoIP > > CISCO PAP2T and a VIKING ELECTRONICS CPA7B > > -----Original Message----- > From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jay Hennigan > Sent: Tuesday, March 13, 2012 12:58 PM > To: voiceops at voiceops.org > Subject: Re: [VoiceOps] Paging system integration with VoIP > > On 3/13/12 9:27 AM, Carlos Alvarez wrote: >> Does anyone here have advice on connecting a Valcom paging system with >> a hosted VoIP system? The site is about a thousand miles away so I >> can't just go play with it. At the most basic level I'm considering >> just a cheap phone on auto-answer and a connection from its headset >> jack to the paging amp. Any other ideas? > > Bogen makes a paging interface TAM-B that connects to an FXS port on an ATA or TA900 Adtran. Works very well. > > Hint: Put it on an extension-only number if possible so that random wrong numbers and telemarketers don't clobber it. > > -- > Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ > VoiceOps mailing list > VoiceOps at voiceops.org > https://puck.nether.net/mailman/listinfo/voiceops > > _______________________________________________ > VoiceOps mailing list > VoiceOps at voiceops.org > https://puck.nether.net/mailman/listinfo/voiceops > >

2 1

Paging system integration with VoIP
by carlos＠televolve.com March 13, 2012

March 13, 2012

Does anyone here have advice on connecting a Valcom paging system with a hosted VoIP system? The site is about a thousand miles away so I can't just go play with it. At the most basic level I'm considering just a cheap phone on auto-answer and a connection from its headset jack to the paging amp. Any other ideas? -- Carlos Alvarez TelEvolve 602-889-3003

6 7

Edgemarc Experiences
by jhoward＠m5.net March 13, 2012

March 13, 2012

>From my limited exposure with them it really only provides QoS on an unmanaged LAN which can help if you are dealing with people on DSL or other public internet connections and the problems they have are LAN based data/VoIP contention. For example someone on the LAN is saturating the uplink with bit torrents - this can help make sure that the VoIP traffic takes priority without you having to manage their firewall/router. Of course this takes some time to setup and test. Simple VLANs can do the same thing with some work as well but the edgemark devices are a decent option for those looking for a one time set it and forget it option in this context. For the real issues - It doesn't support SCCP (those really cool looking Cisco phones) and it really doesn't help anything over the public internet. In some cases a simple TCP based tunnel can help improve call quality over public networks by keeping packet ordering and loss to a minimum but this comes with it's own trials and tribulations without much guarantee. Long story short - it may help depending on the problem you are trying to solve but be aware of the actual problem first. Jesse On Tue, Mar 13, 2012 at 11:00 AM, <voiceops-request at voiceops.org> wrote: > Send VoiceOps mailing list submissions to > voiceops at voiceops.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://puck.nether.net/mailman/listinfo/voiceops > or, via email, send a message with subject or body 'help' to > voiceops-request at voiceops.org > > You can reach the person managing the list at > voiceops-owner at voiceops.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of VoiceOps digest..." > > Today's Topics: > > 1. Edgemarc Experiences (J. Oquendo) > > > ---------- Forwarded message ---------- > From: "J. Oquendo" <sil at infiltrated.net> > To: voiceops at voiceops.org > Cc: > Date: Tue, 13 Mar 2012 10:28:31 -0400 > Subject: [VoiceOps] Edgemarc Experiences > > Hey all, for those running SBC's (Acmes, Sonus, nCites) and NOT using > Broadsoft, how many of you guys have dealt with Edgemarc at the client > edge? What were your experiences? > > -- > =+=+=+=+=+=+=+=+=+=+=+=+=+=+=+**=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ > J. Oquendo > SGFA, SGFE, C|EH, CNDA, CHFI, OSCP, CPT, RWSP, GREM > > "It takes 20 years to build a reputation and five minutes to > ruin it. If you think about that, you'll do things > differently." - Warren Buffett > > 42B0 5A53 6505 6638 44BB 3943 2BF7 D83F 210A 95AF > http://pgp.mit.edu:11371/pks/**lookup?op=get&search=**0x2BF7D83F210A95AF<http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x2BF7D83F210A95AF> > > > > > _______________________________________________ > VoiceOps mailing list > VoiceOps at voiceops.org > https://puck.nether.net/mailman/listinfo/voiceops > >

1 0