- VoiceOps - lists.voiceops.org

Allworx Followme - no audio issue
by ujjval＠simplesignal.com July 22, 2011

July 22, 2011

Hi All: We have a customer with Allworx PBX that is setup for followme on an extension that forwards to a call Phone. When the call gets forwarded, back out the SIP Turnk intous, the allworx has answer confirmation which the followme/cellphone hears fine, when the followme cell phone presses 1 to accept the call, all audio is lost both ways. Call stays up until disconnected. The Allworx sends a REINVITE after the ?1? is pressed?too Anyone seen this behavior with ACME and Allworx and any remedies. Ujjval Karihaloo

5 8

Any Metaswitch / Metasphere EAS users?
by lindsey＠e-c-group.com July 20, 2011

July 20, 2011

I'm looking for Metaswitch / Metasphere EAS users who would be willing to share some packet captures of the Shared-Line-Appearance and Busy-Lamp-Field features from their platform. If you can share, please let me know. Background: I'm looking at the effects of fancy signaling features on network capacity. E.g., "Shared Line Appearance" generates NOTIFY and INVITE transactions on every device where the line is shared. That means a lot more signaling. But what does that mean for the network access links and the various QoS policies in use (e.g., LLQ, CBWFQ, Ethernet strict-priority queues)? The conventional wisdom used to be that SIP signaling was so minute compared to RTP that you could ignore it. But is that still true? For those interested -- You can see the results of the Network Design survey, announced on this list in January, at the upcoming ACM IPTComm meeting in Chicago. The network designs of 36 VoIP service providers are considered. mark at ecg.co | +1-229-316-0013 | http://ecg.co/lindsey On Jan 11, 2011, at 12:20 PM, Mark R Lindsey wrote: > It's best for the Science and Art to have a public discussion about VoIP network designs. What was once an incidental installation task is often recognized as a key activity with serious cost implications. But still, many networks are never designed -- they just happen. IP Networks do not -- by default -- work well for VoIP. > > We the industry should document the current state of the art for the design of VoIP Networks. The need is greatest in carriers and large enterprises networks, but the design of networks for VoIP at all scales is interesting. > > Please help me document the standard industry practices in VoIP Network Design, both of new networks and also the expansion and evolution of existing networks. Your responses will be analyzed and compiled into a publication that will be submitted for conference publication. > > I hope to hear from vendors such as Acme Packet, Audiocodes, BroadSoft, Cisco, Digium, Genband, Metaswitch, Sonus, Taqua, and others. But I especially want feedback from individual designers & integrators. > > Everything you provide will be published online and credited. > > Responses received by February 15, 2011 will be used for the paper submission. > > My employer, ECG, Inc. is a for-profit entity, but this project is NOT a commercial enterprise. We wish to foster and sponsor innovation in VoIP networks in an open, free academic dialog. > > Mark R Lindsey, ECG Inc. > mark at ecg.co | +1-229-316-0013 | http://ecg.co/lindsey > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > VoIP Network Design Survey. > Please respond to lindsey at e-c-group.com > > > > A. If you would be willing to submit reference network designs for publication, please send them in PDF format. [VNDS1-A] > > > > B. Please provide answers to the following questions -- as much as possible. Even if you only have time to answer one question. [VNDS1-B] > > > > Q-1. What application-layer (VoIP) network devices do you regularly design with? What are special network requirements of each device? [VNDS1-B-1] > > > > Q-2. Where do you use public IP addresses, and where do you use private IP addresses? In each case: why do you use that type of address? [VNDS1-B-2] > > > > Q-3. How do you handle customer-premise access devices behind NAT? [VNDS1-B-3] > > > > Q-4. How do you handle peering ("SIP trunks") between carriers? (e.g., SBC? Separate IP assignment per endpoint? Separate Port assign nment? Authentication?) [VNDS1-B-4] > > > > Q-5. How do you guarantee network capacity for VoIP Media traffic? ...for VoIP signaling traffic? [VNDS1-B-5] > > > > Q-6. Are you designing to support SIP over TCP or SCTP? If so, why? If not, do you address fragmentation of large SIP? [VNDS1-B-6] > > > > Q-7. How do you describe your approach to network security boundaries? How do you enforce these boundaries? (Common approaches: firewalls, SBCs, VRFs/routing domains, server packet filters, private IPs and routing policies, etc.) [VNDS1-B-7] > > > > Q-8. What are the key security or operational threats that you design to protect against? [VNDS1-B-8] > > > > Q-9. What are the key network design principles for VoIP Networks that you follow? [VNDS1-B-9] > > > > Q-10. What are the key mistakes you try to avoid in VoIP Network design? [VNDS1-B-10] > > > > Q-11. What future trends in network design and requirements do you anticipate? [VNDS1-B-11] > > > > Q-12. What are your tightest constraints in your network designs? (e.g., Design time? Testing/Stability/Change Control? Rack space? Network link capacity? Money? CPU Capacity? CAM space?) [VNDS1-B-12] > > > > > >

2 1

Porting Cell Numbers
by marylou＠backuptelecom.com July 15, 2011

July 15, 2011

So sorry....when you said Verizon I was thinking ILEC not Verizon Wireless. You shouldn't need an agreement with a carrier to port a number from them. As long as the potential customer's TN homes on the same ILEC tandems that you are connected to, you can port their number to your network. You may want to talk to the other carrier about setting up a provisioning interface with them because you're supposed to issue an LSR to them to request the number be ported, but you shouldn't need an agreement to submit an LSR to them. Mary Lou Carey BackUP Telecom Consulting CLEC Consultant OFF: 615-791-9969 -----Original Message----- From: Eric Hiller [mailto:clec at cygnustel.com] Sent: Tuesday, July 12, 2011 11:54 AM To: Mary Lou Carey Subject: RE: [VoiceOps] Porting Cell Numbers Doesn't it just matter what tandem they have the number homed off of? ... and don't the cellular carriers typically home of the ILECs tandems? On Tue, July 12, 2011 8:26 am, Mary Lou Carey wrote: > You may or may not be able to do this, but I think the bigger question is > how would the call get back to your switch if you don't have any > interconnection trunks with them. > > > Mary Lou Carey > BackUP Telecom Consulting > CLEC Consultant > OFF: 615-791-9969 > > > > -----Original Message----- > From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] > On Behalf Of Eric Hiller > Sent: Monday, July 11, 2011 12:54 PM > To: VoiceOps at voiceops.org > Subject: [VoiceOps] Porting Cell Numbers > > We are a CLEC and regularly port numbers over from the ILEC (ATT) who we > have an ICA with. Would we be able to port cellular/wireless numbers from > say Verizon or Sprint over to us as a landline CLEC without an ICA? I know > we could do it from the Neustar/NPAC side of things, but would > Verizon/Sprint/etc. release the number? > > Thanks! > -Eric > > > > _______________________________________________ > VoiceOps mailing list > VoiceOps at voiceops.org > https://puck.nether.net/mailman/listinfo/voiceops > > >

1 0

T38 delay management
by fasterfourier＠gmail.com July 13, 2011

July 13, 2011

I'm running into occasional problems with failed fax transmissions due to what appears to be excessive delay between receipt of the DIS from the receiving fax and sending of the DCS by the transmitting machine. Here's the setup: -SPA2102 ATA running 5.2.12 with the following fax-related configuration bits: <FAX_CED_Detect_Enable_1_ ua="na">Yes</FAX_CED_Detect_Enable_1_> <FAX_CNG_Detect_Enable_1_ ua="na">Yes</FAX_CNG_Detect_Enable_1_> <FAX_Passthru_Codec_1_ ua="na">G711u</FAX_Passthru_Codec_1_>  <FAX_Codec_Symmetric_1_ ua="na">Yes</FAX_Codec_Symmetric_1_> <FAX_Passthru_Method_1_ ua="na">ReINVITE</FAX_Passthru_Method_1_>  <FAX_Process_NSE_1_ ua="na">No</FAX_Process_NSE_1_> <FAX_Disable_ECAN_1_ ua="na">Yes</FAX_Disable_ECAN_1_> <FAX_Enable_T38_1_ ua="na">Yes</FAX_Enable_T38_1_> <FAX_T38_Redundancy_1_ ua="na">1</FAX_T38_Redundancy_1_>  <FAX_T38_V29_Only_1_ ua="na">No</FAX_T38_V29_Only_1_> <FAX_Tone_Detect_Mode_1_ ua="na">callee only</FAX_Tone_Detect_Mode_1_>  -ATA registered to [commercial asterisk-based multitenant PBX system] running asterisk 1.6 and kamamilio 1.5 -Calls terminated through Level3, Global Crossing, and T38faxing.com Fax calls are set up properly, ReINVITE is issued, RTP stops and T38 session starts as usual. Once the T38 session starts, it appears that it takes about 2.8 seconds for the ATA / fax combination to return a DCS message once the DIS message hits from the terminating gateway. This, when combined with other delays (a few tens of milliseconds between the ATA and terminating gateway) seems to cause the T1 timer (I think that's the one...) on some receiving faxes to expire. A few more DIS messages are sent and then they give up. What is a normal amount of time for a DCS to be returned by the ATA when hit with a DIS? Is there anything that can be done to prune the delay down? Thanks in advance.

1 0

Voip Origination Partners
by Marty_Sorensen＠adp.com July 13, 2011

July 13, 2011

Need some Voip origination provider recommendations domestically in the US besides Level 3 and Verizon that can support hosted pbx and sip trunking. You can contact me off list if you would like to. Martin Sorensen Director, IPNS 3rd Floor West ADP Dealer Services 2525 SW First Avenue, Portland, OR 97201 Phone: (503) 205-4438, Fax: (503) 402-3277 Email: Marty_Sorensen at adp.com<mailto:Joe_Bell at adp.com> This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.

1 0

Porting Cell Numbers
by clec＠cygnustel.com July 12, 2011

July 12, 2011

We are a CLEC and regularly port numbers over from the ILEC (ATT) who we have an ICA with. Would we be able to port cellular/wireless numbers from say Verizon or Sprint over to us as a landline CLEC without an ICA? I know we could do it from the Neustar/NPAC side of things, but would Verizon/Sprint/etc. release the number? Thanks! -Eric

5 4

SPA942 Sends out a 401 Unautorized and Wont Take a Call?
by zak＠simplesignal.com July 11, 2011

July 11, 2011

Happy Friday Everyone- Has anyone encountered the SPA942 sending out a 401 Unauthorized and wont ring or accept calls? Please let me know and what your fix was.. I really appreciate it! *Thanks?* Zak Rupas | Tier 3 Engineer [image: Description: cid:image001.png at 01CBDE2D.5E1CC730] Support Line 303-242-8616 Option 1 www.simplesignal.com

2 2

Linksys SPA942
by zak＠simplesignal.com July 8, 2011

July 8, 2011

Good Morning- Does anyone out there disable Provisioning on the SPA942 after the initial file sequenced is pushed? I have found this as a good patch for stabilizing the phone using the Broadsoft config for my mac.xml file. Please let me know any insight or thoughts.. I sure appreciate it! *Thanks?* Zak Rupas | Tier 3 Engineer [image: Description: cid:image001.png at 01CBDE2D.5E1CC730] Support Line 303-242-8616 Option 1 www.simplesignal.com

2 1

SPA942 Timers and Profile Rules
by zak＠simplesignal.com July 6, 2011

July 6, 2011

Good Morning- I am a new member and wanted to ask a quick question. I am doing interop testing of the Linksys 942 with Broadsoft. I was able to get it working finally! However the phone reboots after 5 minutes. I have been tweaking the timers but need the phone to work with provisioning if need be but still not reboot so quickly. Can someone out there please share their timer values? I used the following per Broadsoft but my phone is still rebooting: Spa942.xml  <Upgrade_Enable group="Provisioning/Firmware_Upgrade">Yes</Upgrade_Enable> <Upgrade_Error_Retry_Delay group="Provisioning/Firmware_Upgrade">160</Upgrade_Error_Retry_Delay> <Resync_Error_Retry_Delay ua="na">3600</Resync_Error_Retry_Delay> <Forced_Resync_Delay ua="na">1400</Forced_Resync_Delay> <Resync_From_SIP ua="na">Yes</Resync_From_SIP> <Resync_After_Upgrade_Attempt ua="na">Yes</Resync_After_Upgrade_Attempt> <Resync_Fails_On_FNF ua="na">Yes</Resync_Fails_On_FNF> *Thanks?* Zak Rupas | Tier 3 Engineer [image: Description: cid:image001.png at 01CBDE2D.5E1CC730] Support Line 303-242-8616 Option 1 www.simplesignal.com

3 3

Cisco linksys spa 942 and tftp
by ujjval＠simplesignal.com July 1, 2011

July 1, 2011

Hi Anyone figured out the easiest way to have spa942 pull config files from a tftp server- file name conventions ..etc , that are known to work. Broadsoft partner config guide states to use .cfg extentions, but the phone seems to only like .xml. , butvstill doesnt pull all files - system file as well as MAC. xml Any direction would help. Ujjval K

5 9